Effects of Laser Scanning Speed on Microstructure and Properties of Ti- Ni Shape Memory Alloy
文献类型：期刊论文
| 作者 | Jiang, Muchi1,2; Ren, Dechun1; Zhao, Xiaoyu1; Cai, Yusheng1; Ji, Haibin1; Lei, Jiafeng1,2; Yang, Rui1,2 |
| 刊名 | RARE METAL MATERIALS AND ENGINEERING
 |
| 出版日期 | 2023-04-01 |
| 卷号 | 52期号:4页码:1455-1463 |
| 关键词 | Ti-Ni shape memory alloy additive manufacturing laser scanning speed defect type mechanical property |
| ISSN号 | 1002-185X |
| 通讯作者 | Ji, Haibin() |
| 英文摘要 | Selective laser melting (SLM) was used to fabricate Ti-Ni shape memory alloys. The effects of scanning speed on internal defects, molten pool morphologies, phase transformation behavior and mechanical properties of the alloy were studied using OM, SEM, XRD, and room-temperature compression. The results show that with the increase of laser scanning speed, the internal defect morphology changes from a nearly regular spherical shape to an irregular one when other printing parameters of SLM remain unchanged. For instance, the width and continuity of the molten pool morphology decrease with the increase of laser scanning speed. Besides, the increasing laser scanning speed initiates that the phase composition of Ni-rich Ti-Ni shape memory alloy changes, B19' martensite content decreases, and B2 austenite content increases. And the transformation temperature of the formed Ni-rich Ti-Ni shape memory alloy decreases at first and then increases with the increase of laser scanning speed, but there is a single transformation peak during the process of temperature rise and fall. At 900 mm/s of the scanning speed, the relative density of the alloy reaches 98.5%, yielding the minimum internal defects. Simultaneously, the sample has a maximum compressive strength of 3120 MPa and a compressive strain of 41%, which is the best printing parameter to produce exceptional properties. |
| WOS研究方向 | Materials Science ; Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000976102200037 |
| 出版者 | NORTHWEST INST NONFERROUS METAL RESEARCH |
| 源URL | [http://ir.imr.ac.cn/handle/321006/177459]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Ji, Haibin |
| 作者单位 | 1.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China 2.Univ Sci & Technol China, Sch Mat Sci & Engn, Shenyang 110016, Peoples R China |
| 推荐引用方式 GB/T 7714 | Jiang, Muchi,Ren, Dechun,Zhao, Xiaoyu,et al. Effects of Laser Scanning Speed on Microstructure and Properties of Ti- Ni Shape Memory Alloy[J]. RARE METAL MATERIALS AND ENGINEERING,2023,52(4):1455-1463. |
| APA | Jiang, Muchi.,Ren, Dechun.,Zhao, Xiaoyu.,Cai, Yusheng.,Ji, Haibin.,...&Yang, Rui.(2023).Effects of Laser Scanning Speed on Microstructure and Properties of Ti- Ni Shape Memory Alloy.RARE METAL MATERIALS AND ENGINEERING,52(4),1455-1463. |
| MLA | Jiang, Muchi,et al."Effects of Laser Scanning Speed on Microstructure and Properties of Ti- Ni Shape Memory Alloy".RARE METAL MATERIALS AND ENGINEERING 52.4(2023):1455-1463. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。