Effect of Phosphorous Content on the Microstructure and Stress Rupture Properties of 15Cr-15Ni Titanium-Modified Austenitic Stainless Steel
文献类型：期刊论文
| 作者 | Qiao, Yufei4,5,6; Liang, Tian4,6; Chen, Sihan4,5,6; Ren, Yuanyuan1; Liu, Chunming2; Qi, Yue3; Ma, Yingche4,6; Liu, Kui4,6 |
| 刊名 | CRYSTALS
 |
| 出版日期 | 2023-04-01 |
| 卷号 | 13期号:4页码:16 |
| 关键词 | phosphorus precipitation behavior phosphides stress rupture life austenitic stainless steel |
| DOI | 10.3390/cryst13040703 |
| 通讯作者 | Liang, Tian(tliang@imr.ac.cn) ; Ma, Yingche(ycma@imr.ac.cn) |
| 英文摘要 | The microstructure of solution-annealed and aged tensile properties and the stress rupture properties of 15Cr-15Ni titanium-modified austenitic stainless steel with different phosphorus contents were investigated using OM, SEM and TEM. The results showed that two phosphide morphologies were observed after long-term isothermal aging at 850 degrees C for 1000 h. One was the needle-like M2P distributed within the grain. The other was the blocky M3P distributed at the grain boundaries and twins. The tensile properties of the alloy were unaffected by the phosphorus content, but the stress rupture properties were significantly impacted. With the increase in the phosphorus content from 70 ppm to 250 ppm, the stress rupture life increased from 148 to 269.7 h. Since the strengthening effect of phosphides within the grain or at the grain boundary has been shown to improve the stress rupture properties of alloys, many nanosized granular precipitates, such as the sigma phase, carbides and phosphides, have been observed at the grain boundary, capable of alleviating the stress concentration and limit the crack propagation between two phases, improving the strength of the grain boundary. Intragranular needle-like phosphides can hinder dislocation movements effectively, which improves the intragranular strength of alloys. |
| WOS研究方向 | Crystallography ; Materials Science |
| 语种 | 英语 |
| WOS记录号 | WOS:000977483100001 |
| 出版者 | MDPI |
| 源URL | [http://ir.imr.ac.cn/handle/321006/177533]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Liang, Tian; Ma, Yingche |
| 作者单位 | 1.China Inst Atom Energy, Beijing 102413, Peoples R China 2.Northeastern Univ, Sch Mat Sci & Engn, Shenyang 110819, Peoples R China 3.Fushun Special Steel Shares Co Ltd, Fushun 113006, Peoples R China 4.Chinese Acad Sci, Inst Met Res, CAS Key Lab Nucl Mat & Safety Assessment, Shenyang 110016, Peoples R China 5.Univ Sci & Technol China, Sch Mat Sci & Engn, Hefei 230026, Peoples R China 6.Chinese Acad Sci, Inst Met Res, Shi Changxu Innovat Ctr Adv Mat, Shenyang 110016, Peoples R China |
| 推荐引用方式 GB/T 7714 | Qiao, Yufei,Liang, Tian,Chen, Sihan,et al. Effect of Phosphorous Content on the Microstructure and Stress Rupture Properties of 15Cr-15Ni Titanium-Modified Austenitic Stainless Steel[J]. CRYSTALS,2023,13(4):16. |
| APA | Qiao, Yufei.,Liang, Tian.,Chen, Sihan.,Ren, Yuanyuan.,Liu, Chunming.,...&Liu, Kui.(2023).Effect of Phosphorous Content on the Microstructure and Stress Rupture Properties of 15Cr-15Ni Titanium-Modified Austenitic Stainless Steel.CRYSTALS,13(4),16. |
| MLA | Qiao, Yufei,et al."Effect of Phosphorous Content on the Microstructure and Stress Rupture Properties of 15Cr-15Ni Titanium-Modified Austenitic Stainless Steel".CRYSTALS 13.4(2023):16. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。