Multifunctional Ti3AlC2-Based Composites via Fused Filament Fabrication and 3D Printing Technology
文献类型：期刊论文
| 作者 | Liu, Dongyan2; Hentschel, Lukas3; Lin, Guoming2; Kukla, Christian4; Schuschnigg, Stephan3; Ma, Na2; Wallis, Christopher1; Momeni, Vahid3; Kitzmantel, Michael1; Sui, Guoxin2 |
| 刊名 | JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
 |
| 出版日期 | 2023-04-25 |
| 页码 | 8 |
| 关键词 | 3D printing additive manufacturing fused filament fabrication (FFF) MAX phase Ti3AlC2 |
| ISSN号 | 1059-9495 |
| DOI | 10.1007/s11665-023-08207-7 |
| 通讯作者 | Kukla, Christian(christian.kukla@unileoben.ac.at) |
| 英文摘要 | MAX phase, as a group of layered ternary carbides and nitrides exhibiting combined properties of metallic and ceramic materials, attracts increasing interest because they own exceptionally chemical, physical, electrical, thermal, and mechanical properties. In the present paper, a novel Ti3AlC2-based green part was manufactured by extrusion-based fused filament fabrication (FFF) and 3D printing technologies. The morphology, thermal/electrical conductivity, thermal stability, electromagnetic interference (EMI) shielding effectiveness (SE), and mechanical properties of Ti3AlC2/binder with the volume ratio of 1:1 were investigated. The tensile and compressive strengths and elongation are measured to be 8.29 MPa and 18.20%, 44.90 MPa and 33.76%, respectively. The morphology of the filament reveals that Ti3AlC2 powders are well bonded by the thermoplastic binder. More importantly, the composite shows good thermal and electrical conductivities together with the excellent EMI shielding effectiveness, which is of great potential in the practical applications as conductor, heat dissipating, anti-static, and EMI shielding materials. The successful fabrication of Ti3AlC2-based composites via FFF-based 3D printing technology is beneficial to develop other MAX phase products with complex geometries and additional functionalities. |
| 资助项目 | Bureau of International Cooperation Chinese Academy Science (Austrian-Chinese Cooperative RTD Project)[GJHZ2045] ; Austrian Research Promotion Agency (FFG) under the program Production of the Future[875650] |
| WOS研究方向 | Materials Science |
| 语种 | 英语 |
| WOS记录号 | WOS:000978944200002 |
| 出版者 | SPRINGER |
| 资助机构 | Bureau of International Cooperation Chinese Academy Science (Austrian-Chinese Cooperative RTD Project) ; Austrian Research Promotion Agency (FFG) under the program Production of the Future |
| 源URL | [http://ir.imr.ac.cn/handle/321006/177545]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Kukla, Christian |
| 作者单位 | 1.RHP Technol GmbH, Austrian Res Ctr, A-2444 Seibersdorf, Austria 2.Chinese Acad Sci, Inst Met Res, Shi Changxu Innovat Ctr Adv Mat, Shenyang 110016, Peoples R China 3.Univ Leoben, Inst Polymer Proc, A-8700 Leoben, Austria 4.Univ Leoben, Ind Liaison Dept, A-8700 Leoben, Austria |
| 推荐引用方式 GB/T 7714 | Liu, Dongyan,Hentschel, Lukas,Lin, Guoming,et al. Multifunctional Ti3AlC2-Based Composites via Fused Filament Fabrication and 3D Printing Technology[J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE,2023:8. |
| APA | Liu, Dongyan.,Hentschel, Lukas.,Lin, Guoming.,Kukla, Christian.,Schuschnigg, Stephan.,...&Sui, Guoxin.(2023).Multifunctional Ti3AlC2-Based Composites via Fused Filament Fabrication and 3D Printing Technology.JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE,8. |
| MLA | Liu, Dongyan,et al."Multifunctional Ti3AlC2-Based Composites via Fused Filament Fabrication and 3D Printing Technology".JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2023):8. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。