High-performance 3D-printed Al2O3 cores for low-temperature sintering
文献类型：期刊论文
| 作者 | Yang, Kun3; Li, Qiaolei1; Chen, Tianci3; Jin, Funan3; Liu, Xinggang3; Liang, Jingjing1,2; Li, Jinguo1,2 |
| 刊名 | CERAMICS INTERNATIONAL
 |
| 出版日期 | 2023-11-15 |
| 卷号 | 49期号:22页码:36894-36906 |
| 关键词 | Ceramic cores 3D printing Flexural strength Low-temperature sintering Al2O3 |
| ISSN号 | 0272-8842 |
| DOI | 10.1016/j.ceramint.2023.09.020 |
| 通讯作者 | Li, Qiaolei(qlli@imr.ac.cn) ; Li, Jinguo(jgli@imr.ac.cn) |
| 英文摘要 | Superalloy single-crystal blades are essential components of aviation engines. The increased thrust-to-weight ratio in aviation engines necessitates more stringent requirements on the complex ceramic core formation of the internal cooling channel of the hollow blade. The progress of traditional hot injection processes for ceramic cores has difficulty meeting the increasingly complex core production requirements. Vat photopolymerization 3D-printing technology for ceramic core fabrication has the advantages of not requiring mold manufacturing and flexible shaping, making it widely used in the production of complex structured ceramic cores. In addition, the industrial applicability of Al2O3 ceramic cores is limited by their low performance and high sintering temperature. In this work, high-performance Al2O3 cores with low-temperature sintering were successfully fabricated using DLP-3D-printing technology. The effects of Y2SiO5 addition and sintering temperature on the microstructure and properties of Al2O3 ceramic cores were investigated. The sintering mechanism of Al2O3 ceramic cores was investigated through analysis of phase composition, microstructure, and thermodynamic calculations. The results of the work show that, the flexural strength and sintering shrinkage of the Al2O3 ceramic cores progressively increased as the sintering temperature increased, while the open porosity rapidly dropped. The density of the Al2O3 ceramic cores increases significantly when the sintering temperature exceeds 1450 degrees C. The optimum sintering temperature for the ceramic core (15 wt% addition of Y2SiO5) is 1350 degrees C, at which point the strength is 20.282 MPa and the open porosity is 39.31%. This work provides a new process of the high-performance Al2O3 ceramic cores for low-temperature sintering, which reveals the mechanism of Y2SiO5's effect on the densification of Al2O3 ceramics during sintering. |
| 资助项目 | Defense Industrial Technology Development Program[JCKY2022130C005] ; National Natural Sci-ence Foundation of China[U22A20129] ; National Science and Technology Major Project[2017-VI-0002 -0072] ; National Key Research and Development Program of China[2018YFB1106600] ; Fundamental Research Funds for the Central Universities[WK5290000003] ; Students ' Innovation and Entrepreneurship Foun-dation of USTC[CY2022G10] ; Students ' Innovation and Entrepreneurship Foun-dation of USTC[CY2022C24] |
| WOS研究方向 | Materials Science |
| 语种 | 英语 |
| WOS记录号 | WOS:001091259300001 |
| 出版者 | ELSEVIER SCI LTD |
| 资助机构 | Defense Industrial Technology Development Program ; National Natural Sci-ence Foundation of China ; National Science and Technology Major Project ; National Key Research and Development Program of China ; Fundamental Research Funds for the Central Universities ; Students ' Innovation and Entrepreneurship Foun-dation of USTC |
| 源URL | [http://ir.imr.ac.cn/handle/321006/177692]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Li, Qiaolei; Li, Jinguo |
| 作者单位 | 1.Chinese Acad Sci, Shi Changxu Innovat Ctr Adv Mat, Inst Met Res, Shenyang 110016, Peoples R China 2.Space Mfg Technol CAS Key Lab, Beijing 100094, Peoples R China 3.Northeastern Univ, Sch Mat Sci & Engn, Shenyang 110819, Peoples R China |
| 推荐引用方式 GB/T 7714 | Yang, Kun,Li, Qiaolei,Chen, Tianci,et al. High-performance 3D-printed Al2O3 cores for low-temperature sintering[J]. CERAMICS INTERNATIONAL,2023,49(22):36894-36906. |
| APA | Yang, Kun.,Li, Qiaolei.,Chen, Tianci.,Jin, Funan.,Liu, Xinggang.,...&Li, Jinguo.(2023).High-performance 3D-printed Al2O3 cores for low-temperature sintering.CERAMICS INTERNATIONAL,49(22),36894-36906. |
| MLA | Yang, Kun,et al."High-performance 3D-printed Al2O3 cores for low-temperature sintering".CERAMICS INTERNATIONAL 49.22(2023):36894-36906. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。