New construction of polypyrrole interphase layers to improve performance stability of NaTi2(PO4)(3) anode for aqueous Na-ion batteries
文献类型：期刊论文
| 作者 | Wang, Wenjun2; Wu, Jiangtao1,3; Zeng, Chaoliu2 |
| 刊名 | SOLID STATE IONICS
 |
| 出版日期 | 2023-09-01 |
| 卷号 | 397页码:16 |
| 关键词 | Aqueous sodium-ion batteries NaTi2(PO4)(3) anode Polypyrrole interphase layer Performance stability Electrochemical kinetics |
| ISSN号 | 0167-2738 |
| DOI | 10.1016/j.ssi.2023.116259 |
| 通讯作者 | Wang, Wenjun(wangwenjun@sslab.org.cn) ; Zeng, Chaoliu(zengchaoliu@sslab.org.cn) |
| 英文摘要 | NaTi2(PO4)(3) (NTP) as a promising anode material for aqueous sodium-ion batteries has attracted widespread attention. However, the NTP material commonly exhibits significant capacity fade, possibly mainly attributing to the change of the chemical stability of NTP in the aqueous electrolytes. Coating NTP with polypyrrole (PPY) conductive polymers is a promising strategy to solve this problem, but in situ synthesis of the PPY polymer in the presence of the NTP active materials seems not to be easy, reported by the previous work, owing to the inferior adhesion of the synthesized PPY to the NTP surface. Thereby, this work has attempted ex situ synthesis of PPY coatings on the carbon-coated NTP (NTP/C) anode surface in the presence of small amounts of carbon conductive additives and organic binders, and then it shows that synthesized conductive PPY interphase layer can readily adhere to the NTP surface with no visible phase separation through the electrochemical oxidation polymerization under certain potentials in the pyrrole (PY)-containing electrolytes. The corresponding optimized oxidation modification conditions of the anode can be obtained, and the evolution law of the anode interface with the content of the electrolyte additives, the oxidation potential and the oxidation time can be established. Thus, the as-synthesized optimal modified anodes, with the thickness of about 24 mu m for the PPY coating, are observed to have fairly large charge/discharge capacity of 228.6 mAh.g(-1), high coulombic efficiency (> 95%) and enhanced cycling stability. Furthermore, a schematic for the charge/discharge processes involving possible reaction pathways at the modified anodes with the PPY layers in Na2SO4 aqueous electrolytes has been proposed. |
| 资助项目 | Guangdong Basic and Applied Basic Research Foundation, China[2019A1515110825] |
| WOS研究方向 | Chemistry ; Physics |
| 语种 | 英语 |
| WOS记录号 | WOS:001001287500001 |
| 出版者 | ELSEVIER |
| 资助机构 | Guangdong Basic and Applied Basic Research Foundation, China |
| 源URL | [http://ir.imr.ac.cn/handle/321006/178195]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Wang, Wenjun; Zeng, Chaoliu |
| 作者单位 | 1.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China 2.Songshan Lake Mat Lab, Dongguan 523808, Peoples R China 3.Univ Sci & Technol China, Sch Mat Sci & Engn, Shenyang 110016, Peoples R China |
| 推荐引用方式 GB/T 7714 | Wang, Wenjun,Wu, Jiangtao,Zeng, Chaoliu. New construction of polypyrrole interphase layers to improve performance stability of NaTi2(PO4)(3) anode for aqueous Na-ion batteries[J]. SOLID STATE IONICS,2023,397:16. |
| APA | Wang, Wenjun,Wu, Jiangtao,&Zeng, Chaoliu.(2023).New construction of polypyrrole interphase layers to improve performance stability of NaTi2(PO4)(3) anode for aqueous Na-ion batteries.SOLID STATE IONICS,397,16. |
| MLA | Wang, Wenjun,et al."New construction of polypyrrole interphase layers to improve performance stability of NaTi2(PO4)(3) anode for aqueous Na-ion batteries".SOLID STATE IONICS 397(2023):16. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。