Microstructure evolution and deformation mechanisms during compression of a harmonic-structured Ti-24Nb-4Zr-8Sn alloy
文献类型：期刊论文
| 作者 | Fer, Benoit1,3; Tingaud, David3; Gubicza, Jeno2,4; Chinh, Nguyen Quang4; Hao, Yulin5; Prima, Frederic1; Cazes, Fabien3; Dirras, Guy3 |
| 刊名 | JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
 |
| 出版日期 | 2023-09-01 |
| 卷号 | 26页码:1260-1275 |
| 关键词 | Titanium alloy Harmonic structure Spark Plasma Sintering Dislocations Plasticity mechanisms Hetero-deformation induced stress |
| ISSN号 | 2238-7854 |
| DOI | 10.1016/j.jmrt.2023.07.250 |
| 通讯作者 | Fer, Benoit(ferbenoit@gmail.com) ; Gubicza, Jeno(jeno.gubicza@ttk.elte.hu) |
| 英文摘要 | Processing heterogeneous microstructures, especially the so-called harmonic structures consisting of soft core and hard shell regions, is an efficient way to achieve a strength-ductility trade-off in classical metallurgy. In this study, two harmonic samples with the same composition of Ti-24Nb-4Zr-8Sn but different microstructures were processed to exhibit different grain size heterogeneities between the core and the shell. Both samples were consolidated from a ball-milled powder using Spark Plasma Sintering (SPS) but applying two different sintering times, 1 and 60 min. The grain size heterogeneities were higher for the longer SPS sintering time due to the enhanced grain dimension in the core for 60 min consolidation time. The mechanical behavior of the two materials was studied via a monotonic quasi-static compression test. For both harmonic-structured Ti-24Nb-4Zr-8Sn alloys, a high compressive proof stress of about 1 GPa was detected. The strain-hardening rate was higher for the longer SPS time due to the higher grain size differ-ences between the core and shell. A high dislocation density was detected in both mate-rials after compression deformation (several tens of 1014 m-2). The dislocations tend to form cells and LAGBs during compression. The dislocation pile-ups at the core-shell in-terfaces caused a back stress of about 640 MPa after compression at 2-5% strains. The contributions of the different features of the microstructure (grain size, a phase pre-cipitates, and oxygen concentration) to the proof stress were determined. & COPY; 2023 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/). |
| 资助项目 | French National Research Agency ; Ecole Doctorale Galilee ; University Sorbonne Paris Nord ; [ANR 14-CE07-0003] |
| WOS研究方向 | Materials Science ; Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:001069588700001 |
| 出版者 | ELSEVIER |
| 资助机构 | French National Research Agency ; Ecole Doctorale Galilee ; University Sorbonne Paris Nord |
| 源URL | [http://ir.imr.ac.cn/handle/321006/179151]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Fer, Benoit; Gubicza, Jeno |
| 作者单位 | 1.PSL Univ, Inst Rech Chim Paris, Chim ParisTech, CNRS, F-75005 Paris, France 2.Eotvos Lorand Univ, Dept Mat Phys, POB 32, H-1518 Budapest, Hungary 3.Univ Sorbonne Paris Nord, Lab Sci Proc & Mat, CNRS, UPR 3407, F-93430 Villetaneuse, France 4.Eotvos Lorand Univ, Dept Mat Phys, POB 32, H-1518 Budapest, Hungary 5.Chinese Acad Sci, Inst Met Res, Shi Changxu Innovat Ctr Adv Mat, Shenyang 110016, Peoples R China |
| 推荐引用方式 GB/T 7714 | Fer, Benoit,Tingaud, David,Gubicza, Jeno,et al. Microstructure evolution and deformation mechanisms during compression of a harmonic-structured Ti-24Nb-4Zr-8Sn alloy[J]. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T,2023,26:1260-1275. |
| APA | Fer, Benoit.,Tingaud, David.,Gubicza, Jeno.,Chinh, Nguyen Quang.,Hao, Yulin.,...&Dirras, Guy.(2023).Microstructure evolution and deformation mechanisms during compression of a harmonic-structured Ti-24Nb-4Zr-8Sn alloy.JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T,26,1260-1275. |
| MLA | Fer, Benoit,et al."Microstructure evolution and deformation mechanisms during compression of a harmonic-structured Ti-24Nb-4Zr-8Sn alloy".JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T 26(2023):1260-1275. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。