Chatter-suppressing ruling method based on double-layer elastic support
文献类型：期刊论文
| 作者 | S. Yu, Jirigalantu, H. Yu, X. Yao and W. Li |
| 刊名 | Applied Optics
 |
| 出版日期 | 2023 |
| 卷号 | 62期号:10页码:2479-2486 |
| ISSN号 | 1559128X |
| DOI | 10.1364/AO.484486 |
| 英文摘要 | A cross-hinge spring is the preferred support for a ruling tool because of its excellent flexibility. However, there are high precision requirements for the tool installation, which make the installation and adjustments difficult. There also is poor robustness against interference, which readily results in tool chatter. These issues affect the quality of the grating. This paper proposes an elastic ruling tool carrier with a double-layer parallel-spring mechanism, establishes a torque model of the spring, and analyzes its force state. In a simulation, the spring deformation and frequency modes of the two ruling tool carriers are compared and the overhang length of the parallel-spring mechanism is optimized. In addition, the performance of the optimized ruling tool carrier is analyzed in a grating ruling experiment to verify the carrier’s effectiveness. The results show that compared to the cross-hinge elastic support, the deformation of the parallel-spring mechanism by a ruling force in the X direction is on the same order of magnitude. However, the deformation in the Y direction is reduced by a factor of 270, and the deformation in the Z direction is reduced by a factor of 32. The torque of the proposed tool carrier is slightly higher (12.8%) in the Z direction but lower by a factor of 2.5 in the X direction and by a factor of 60 in the Y direction. The overall stiffness of the proposed tool carrier is improved and the first-order frequency of the proposed structure is higher by a factor of 2.8. The proposed tool carrier thus better suppresses chatter, effectively reducing the effect of the ruling tool installation error on the grating quality. The flutter suppression ruling method can provide a technical basis for further research on high-precision grating ruling manufacturing technology. © 2023 Optica Publishing Group. |
| URL标识 | 查看原文 |
| 源URL | [http://ir.ciomp.ac.cn/handle/181722/68118]  |
| 专题 | 中国科学院长春光学精密机械与物理研究所 |
| 推荐引用方式 GB/T 7714 | S. Yu, Jirigalantu, H. Yu, X. Yao and W. Li. Chatter-suppressing ruling method based on double-layer elastic support[J]. Applied Optics,2023,62(10):2479-2486. |
| APA | S. Yu, Jirigalantu, H. Yu, X. Yao and W. Li.(2023).Chatter-suppressing ruling method based on double-layer elastic support.Applied Optics,62(10),2479-2486. |
| MLA | S. Yu, Jirigalantu, H. Yu, X. Yao and W. Li."Chatter-suppressing ruling method based on double-layer elastic support".Applied Optics 62.10(2023):2479-2486. |
入库方式： OAI收割
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。