Numerical simulation of spray cooling heat transfer evolution based on experimental data
文献类型：期刊论文
| 作者 | Yang, Xin2,3; Shen, Feng3 ; Wang, Jia2; Wu, Di2; Duan, Longsheng2; Duan, Li1,2; Kang, Qi1,2; Duan L(段俐); Kang Q(康琦); Wu D(吴笛)
|
| 刊名 | PHYSICS OF FLUIDS
 |
| 出版日期 | 2024-09-01 |
| 卷号 | 36期号:9页码:21 |
| ISSN号 | 1070-6631 |
| DOI | 10.1063/5.0223935 |
| 通讯作者 | Wu, Di(wudi@imech.ac.cn) ; Duan, Longsheng(russellduan@163.com) ; Kang, Qi(kq@imech.ac.cn) |
| 英文摘要 | Spray cooling is an effective solution for high heat flux dissipation challenges. Accurate prediction of heat transfer efficiency by numerical simulation can reduce the cost of spray cooling in engineering applications. To improve the accuracy of numerical simulation, this study develops a mathematical model for droplet collision and heat transfer response based on experimental data. In spray cooling experiments, droplets are sprayed onto a 200 degrees C aluminum alloy thermal wall using an atomizing nozzle, temperature is monitored, and the curve of heat flux variation during cooling is estimated from temperature data. Analysis of high-speed photography results provides the droplet diameter, velocity, and spatial distribution. We discover that the average Weber number of droplets, We, has a power-law relationship with the volumetric flow rate, Q, as We similar to Q(1.55). The velocity and position of spray droplets approximately follow a normal distribution, while the diameter follows a Log-normal distribution. By analyzing the relation between heat flux and spray distribution, an experimental-data-based model, named Droplet Collision-Associated Heat Transfer Model, is designed. Integrating this experimental-data-based model with the discrete phase model (DPM), the heat transfer evolution process in spray cooling is simulated with high reliability. Particles sources are generated based on the experimentally obtained droplet parameter probability distributions, DPM is used to capture the trajectories of droplets, and the droplet impact heat transfer correlation model calculates the thermal response of the wall. Compared with experimental results, the simulation error is only 7.49%. Simulation results indicate that spray cooling at high flow rates has better temperature uniformity. |
| WOS关键词 | DROPLET ; IMPACT ; SURFACE ; ENGINE ; FLUX ; FILM |
| 资助项目 | National Natural Science Foundation of China[12102438] ; National Natural Science Foundation of China[12032020] ; National Natural Science Foundation of China[12072354] ; China Manned Space Engineering Program (Fluid Physics Experimental Rack and the Priority Research Program of Space Station) |
| WOS研究方向 | Mechanics ; Physics |
| 语种 | 英语 |
| WOS记录号 | WOS:001306974700017 |
| 资助机构 | National Natural Science Foundation of China ; China Manned Space Engineering Program (Fluid Physics Experimental Rack and the Priority Research Program of Space Station) |
| 源URL | [http://dspace.imech.ac.cn/handle/311007/96554]  |
| 专题 | 力学研究所_国家微重力实验室 |
| 通讯作者 | Wu, Di; Duan, Longsheng; Kang, Qi |
| 作者单位 | 1.Univ Chinese Acad Sci, Sch Engn Sci, Beijing 100049, Peoples R China 2.Chinese Acad Sci, Inst Mech, Key Lab Micrograv, Beijing 100190, Peoples R China 3.Beijing Univ Technol, Coll Mech & Energy Engn, Beijing 100124, Peoples R China |
| 推荐引用方式 GB/T 7714 | Yang, Xin,Shen, Feng,Wang, Jia,et al. Numerical simulation of spray cooling heat transfer evolution based on experimental data[J]. PHYSICS OF FLUIDS,2024,36(9):21. |
| APA | Yang, Xin.,Shen, Feng.,Wang, Jia.,Wu, Di.,Duan, Longsheng.,...&吴笛.(2024).Numerical simulation of spray cooling heat transfer evolution based on experimental data.PHYSICS OF FLUIDS,36(9),21. |
| MLA | Yang, Xin,et al."Numerical simulation of spray cooling heat transfer evolution based on experimental data".PHYSICS OF FLUIDS 36.9(2024):21. |
入库方式： OAI收割
来源：力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。