Intrinsic tensile brittleness of tilted grain boundaries and its shear toughening
文献类型：期刊论文
| 作者 | Meng, Jia3; Peng, Shenyou3 ; Fang, Qihong3; Li, Jia3; Wei YJ(魏宇杰)1,2
|
| 刊名 | JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
 |
| 出版日期 | 2024-12-01 |
| 卷号 | 193页码:16 |
| 关键词 | Grain boundary Misorientation Tensile brittleness Shear toughening Brittle-ductile transition |
| ISSN号 | 0022-5096 |
| DOI | 10.1016/j.jmps.2024.105869 |
| 通讯作者 | Peng, Shenyou(pengshenyou@hnu.edu.cn) ; Wei, Yujie(yujie_wei@lnm.imech.ac.cn) |
| 英文摘要 | In the endeavors of working with microstructures in polycrystalline metals for better strength and ductility, grain boundaries (GBs) are placed at the front burner for their pivotal roles in plastic deformation. Often the mechanical properties of polycrystalline metals are governed by mutual interactions among GBs and dislocations. A thorough comprehension of GB deformation is therefore critical for the design of metals of superb performance. In this research, we investigated the mechanical behavior of symmetric tilt grain boundaries in face-centered cubic (F.C.C.) nickel, which may be subject to tension, shearing, and mixing-mode load using molecular dynamics simulations. We observed that (1) there exist four types of micro deformation mechanisms in GBs, and illustrate at the atomistic scale their distinctions and their dependence on the activation of lattice slip in the crystal; (2) GBs are intrinsically brittle under tension but exhibit ductile behavior during shearing. Shifting from pure tension with increasing shear component during mixing-mode load leads to GB toughening; and (3) there lacks conceivable dependence of GB tensile strength on tilted GBs, in contrast to a relatively rough trend of greater shear strength in GBs of large misorientation. GB energy shows no direct connection with GB strength, as broadly reported in existing literature. This research enhances our mechanistic understanding of GB plasticity in crystalline metals, and points to a potential way of making strong-yet-tough polycrystalline metals through GB engineering: in addition to GB structure manipulation, tuning the loading mode of GBs may open another avenue for their better performance. |
| 分类号 | 一类/力学重要期刊 |
| WOS关键词 | NANOCRYSTALLINE METALS ; ATOMISTIC SIMULATION ; SYMMETRIC TILT ; MIGRATION ; STRESS ; DIFFUSION ; MODEL ; DEFORMATION ; NUCLEATION ; MECHANISM |
| 资助项目 | NSFC (National Natural Science Foundation of China) Basic Science Center for 'Multiscale Problems in Nonlinear Mechanics'[11988102] ; NSFC[12102133] |
| WOS研究方向 | Materials Science ; Mechanics ; Physics |
| 语种 | 英语 |
| WOS记录号 | WOS:001320625500001 |
| 资助机构 | NSFC (National Natural Science Foundation of China) Basic Science Center for 'Multiscale Problems in Nonlinear Mechanics' ; NSFC |
| 其他责任者 | Peng, Shenyou ; Wei, Yujie |
| 源URL | [http://dspace.imech.ac.cn/handle/311007/96883]  |
| 专题 | 力学研究所_非线性力学国家重点实验室 |
| 作者单位 | 1.Univ Chinese Acad Sci, Sch Engn Sci, Beijing 100049, Peoples R China 2.Chinese Acad Sci, Inst Mech, LNM, Beijing 100190, Peoples R China; 3.Hunan Univ, Coll Mech & Vehicle Engn, Changsha 410082, Peoples R China; |
| 推荐引用方式 GB/T 7714 | Meng, Jia,Peng, Shenyou,Fang, Qihong,et al. Intrinsic tensile brittleness of tilted grain boundaries and its shear toughening[J]. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS,2024,193:16. |
| APA | Meng, Jia,Peng, Shenyou,Fang, Qihong,Li, Jia,&魏宇杰.(2024).Intrinsic tensile brittleness of tilted grain boundaries and its shear toughening.JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS,193,16. |
| MLA | Meng, Jia,et al."Intrinsic tensile brittleness of tilted grain boundaries and its shear toughening".JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS 193(2024):16. |
入库方式： OAI收割
来源：力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。