Laser powder bed fusion of metastable β titanium alloys: Enhanced strength and plasticity through simultaneous activation of multiple deformation mechanisms
文献类型:期刊论文
作者 | Zhang, Wenjing2; Qi, Xiaonan2; Zhong, Shuyan2; Wang, Kai3; Zhang, Shubo2; Jiao, Ye2; Li, Ang4; Xu, Huaqi1; Chen, Junyu5; Fang, Gang5 |
刊名 | ADDITIVE MANUFACTURING
![]() |
出版日期 | 2024-08-05 |
卷号 | 93 |
关键词 | Laser powder bed fusion Metastable beta titanium alloy Deformation mechanism omega phase beta phase stability |
ISSN号 | 2214-8604 |
DOI | 10.1016/j.addma.2024.104437 |
通讯作者 | Qi, Xiaonan(XiaonanQi_Tsinghua@163.com) ; Liu, Wei(liuw@tsinghua.edu.cn) |
英文摘要 | The excellent mechanical properties of metastable beta titanium alloys make them suitable for use in aerospace and biomedical fields. However, the deformation mechanisms of these alloys are currently limited to slip/twinning or twinning/transformation-induced plasticity (TRIP) based on beta phase stability, hindering high strength and plasticity. In this study, we regulated the laser powder bed fusion (LPBF) parameters to control omega phase density and beta phase stability, thereby simultaneously triggering slip/twinning/TRIP deformation mechanisms and resulting in a high strength-plastic metastable beta titanium alloy. The results demonstrated that reducing laser energy density decreased the omega phase fraction, leading to a decrease in beta phase stability. The formation of the omega phase in specimens with low energy density increased the strain requirements for TRIP to occur, promoting dislocation slip and twinning initiation under low strain conditions. Due to TRIP effect activation at high strains, the alpha ' phase rather than the alpha '' phase became the transformation product, subsequently promoting twin formation within the alpha ' phase during further deformation. Generation of dislocation/twinning/TRIP and twins in the alpha' phase resulted in an LPBF-ed metastable beta Ti-1023 alloy with excellent strength and plasticity, which surpassed previous research findings for LPBF metastable beta titanium alloys and overcame the strength-plasticity trade-off observed in traditional metal materials. |
WOS关键词 | TI-NB ALLOYS ; OMEGA-PHASE ; BCC PHASE ; MICROSTRUCTURE ; TRANSFORMATION ; BEHAVIOR ; MARTENSITE ; MODULUS ; EXAMPLE ; DESIGN |
资助项目 | Program of China[2019YFE03130003] ; Program of China[2022YEF03130003] ; China Postdoctoral Science Foundation[2022M711753] ; Postdoctoral Fellowship Program of CPSF[GZC20231201] |
WOS研究方向 | Engineering ; Materials Science |
语种 | 英语 |
WOS记录号 | WOS:001320607300001 |
出版者 | ELSEVIER |
资助机构 | Program of China ; China Postdoctoral Science Foundation ; Postdoctoral Fellowship Program of CPSF |
源URL | [http://ir.hfcas.ac.cn:8080/handle/334002/135634] ![]() |
专题 | 中国科学院合肥物质科学研究院 |
通讯作者 | Qi, Xiaonan; Liu, Wei |
作者单位 | 1.Chinese Acad Sci, Inst Plasma Phys, Hefei 230031, Peoples R China 2.Tsinghua Univ, Sch Mat Sci & Engn, Beijing 100084, Peoples R China 3.Beihang Univ, Sch Mat Sci & Engn, Xueyuan Rd 37, Beijing 100191, Peoples R China 4.China United Gas Turbine Technol Co Ltd, Beijing 100016, Peoples R China 5.Tsinghua Univ, Dept Mech Engn, State Key Lab Tribol, Beijing 100084, Peoples R China 6.Suzhou Lab, SIP, 388 Ruoshui St, Suzhou 215123, Jiangsu, Peoples R China |
推荐引用方式 GB/T 7714 | Zhang, Wenjing,Qi, Xiaonan,Zhong, Shuyan,et al. Laser powder bed fusion of metastable β titanium alloys: Enhanced strength and plasticity through simultaneous activation of multiple deformation mechanisms[J]. ADDITIVE MANUFACTURING,2024,93. |
APA | Zhang, Wenjing.,Qi, Xiaonan.,Zhong, Shuyan.,Wang, Kai.,Zhang, Shubo.,...&Liu, Wei.(2024).Laser powder bed fusion of metastable β titanium alloys: Enhanced strength and plasticity through simultaneous activation of multiple deformation mechanisms.ADDITIVE MANUFACTURING,93. |
MLA | Zhang, Wenjing,et al."Laser powder bed fusion of metastable β titanium alloys: Enhanced strength and plasticity through simultaneous activation of multiple deformation mechanisms".ADDITIVE MANUFACTURING 93(2024). |
入库方式: OAI收割
来源:合肥物质科学研究院
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。