Development of pulse-type skin friction balance use in shock tunnel
文献类型:期刊论文
作者 | Zhang PH(张彭豪); Wang Y(王粤); Wang YP(汪运鹏) |
刊名 | REVIEW OF SCIENTIFIC INSTRUMENTS
![]() |
出版日期 | 2025-04-01 |
卷号 | 96期号:4页码:13 |
ISSN号 | 0034-6748 |
DOI | 10.1063/5.0246911 |
通讯作者 | Wang, Yunpeng(wangyunpeng@imech.ac.cn) |
英文摘要 | The wall shear stress significantly affects the aerodynamic characteristics and flight safety of hypersonic aircraft. More accurate and reliable diagnostic instruments are required to fully understand and optimize the distribution of wall shear stress in hypersonic high-enthalpy flow. Two types of assembled and integrated skin friction balances for high-enthalpy impulse facilities were developed. The integrated balance was processed using additive manufacturing, also known as 3D printing. The static calibration uncertainty of the two types of skin friction balances is lower than 0.2% FS at 95% confidence. The first-order vibration frequency is about 50 Hz. The applicability and reliability of the developed skin friction balance were verified in the JF-12 shock tunnel built by the Institute of Mechanics, Chinese Academy of Sciences. A series of wall shear measurement tests for flat-plate boundary layers were carried out, in a freestream with a nominal Mach number of 7 and a unit Reynolds number of about 10(6). The wall shear results were in good agreement with the numerical simulation and empirical formula results. The minimum deviation can reach 3.67% of the measured value, which verifies the applicability and reliability of the two types of skin friction balances for accurate wall shear stress in high-enthalpy pulse flow, especially providing experimental support for the feasibility of the additive-manufactured balance. |
分类号 | Q3 |
WOS关键词 | WALL-SHEAR-STRESS ; ELEMENT ; FLOW ; CALIBRATION |
WOS研究方向 | Instruments & Instrumentation ; Physics |
语种 | 英语 |
WOS记录号 | WOS:001458024900008 |
其他责任者 | 汪运鹏 |
源URL | [http://dspace.imech.ac.cn/handle/311007/100783] ![]() |
专题 | 力学研究所_高温气体动力学国家重点实验室 |
推荐引用方式 GB/T 7714 | Zhang PH,Wang Y,Wang YP. Development of pulse-type skin friction balance use in shock tunnel[J]. REVIEW OF SCIENTIFIC INSTRUMENTS,2025,96(4):13. |
APA | 张彭豪,王粤,&汪运鹏.(2025).Development of pulse-type skin friction balance use in shock tunnel.REVIEW OF SCIENTIFIC INSTRUMENTS,96(4),13. |
MLA | 张彭豪,et al."Development of pulse-type skin friction balance use in shock tunnel".REVIEW OF SCIENTIFIC INSTRUMENTS 96.4(2025):13. |
入库方式: OAI收割
来源:力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。