中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
Tribological behaviors of a Ni-free Zr-based bulk metallic glass in simulated physiological environments

文献类型:期刊论文

作者Xie, Chaoju; Zhang, Shiqiang; Zhang M(张猛); Chen Y(陈艳); Li, Zu; Zhou, Shengfeng; Yu, Zhentao
刊名INTERMETALLICS
出版日期2025-07-01
卷号182页码:11
关键词Bulk metallic glass Zr-based Oxidative wear Simulated physiological environments
ISSN号0966-9795
DOI10.1016/j.intermet.2025.108778
通讯作者Zhang, Meng(m.zhangiwrm@jnu.edu.cn) ; Li, Zu(lizu2020@gzhu.edu.cn)
英文摘要Ni-free Zr-based bulk metallic glass (BMG) generally exhibits excellent combination of biocompatibility and mechanical properties, making it a potential candidate for biomedical implants. However, the in-vitro tribological behaviors and wear resistance of Zr-based BMGs still remain less understood. In this study, the wear process of a Ni-free biocompatible Zr60.14Cu22.31Al9.7Fe4.85Ag3 BMG in 3 simulated physiological environments, i. e., deionized (DI) water, 0.9 wt% NaCl solution, and phosphate buffer saline (PBS) solution, are studied using Si3N4 ceramic as the counter-material. The results indicate that Zr60.14Cu22.31Al9.7Fe4.85Ag3 BMG show a specific wear rate less than 1/3 of Ti6Al4V alloy in all the 3 simulated physiological environments, which also surpasses currently reported wear resistance of Zr-based BMGs in the same environments. Specifically, the wear process of Zr60.14Cu22.31Al9.7Fe4.85Ag3 BMG shows a 3-staged character, i.e., the running stage, the transition stage, and the dynamic stable stage, with the main wear mechanism transiting from adhesive wear to coexistence of adhesive wear and oxidative wear, and eventually to oxidative wear. During the transition of wear mechanism, the formation of oxide layer on the worn surface plays the key role, which provides protection against wear and leads to better wear resistance. Notably, the relatively higher wear rate of Zr60.14Cu22.31Al9.7Fe4.85Ag3 BMG in 0.9 wt% NaCl solution and PBS solution than that in DI water is attributed to the corrosivity of wear environments, which weakens the adhesion between oxide layer and BMG substrate thus promoting spalling of oxide layer and enhancing wear degradation. These results indicate the synergistic effect of corrosion and wear in Zr-based BMG in simulated physiological environments. Our work provides insights in developing wear-resistant Zr-based BMGs for implantable biomaterials.
分类号二类/Q1
WOS关键词CORROSION BEHAVIOR ; WEAR-RESISTANCE ; BIOMATERIALS ; ALLOYS ; CU ; MECHANISM
资助项目National natural science foundation of China[52371156] ; Guangdong Basic and Applied Basic Research Foundation[2022A1515110224] ; Guangdong Basic and Applied Basic Research Foundation[2024A1515010215] ; Opening fund of State Key Laboratory of Nonlinear Mechanics
WOS研究方向Chemistry ; Materials Science ; Metallurgy & Metallurgical Engineering
语种英语
WOS记录号WOS:001462371900001
资助机构National natural science foundation of China ; Guangdong Basic and Applied Basic Research Foundation ; Opening fund of State Key Laboratory of Nonlinear Mechanics
其他责任者张猛 ; Li, Zu
源URL[http://dspace.imech.ac.cn/handle/311007/100846]  
专题力学研究所_非线性力学国家重点实验室
推荐引用方式
GB/T 7714
Xie, Chaoju,Zhang, Shiqiang,Zhang M,et al. Tribological behaviors of a Ni-free Zr-based bulk metallic glass in simulated physiological environments[J]. INTERMETALLICS,2025,182:11.
APA Xie, Chaoju.,Zhang, Shiqiang.,张猛.,陈艳.,Li, Zu.,...&Yu, Zhentao.(2025).Tribological behaviors of a Ni-free Zr-based bulk metallic glass in simulated physiological environments.INTERMETALLICS,182,11.
MLA Xie, Chaoju,et al."Tribological behaviors of a Ni-free Zr-based bulk metallic glass in simulated physiological environments".INTERMETALLICS 182(2025):11.

入库方式: OAI收割

来源:力学研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。