中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
首页 机构 成果 学者
  
  1. CAS IR Grid
  2. 力学研究所
  3. 中国科学院力学研究所
  4. 非线性力学国家重点实验室
Investigation of a New Stacking Pattern of Laminates with Approximately Constant Bending Stiffness

文献类型：期刊论文

作者Liu QN(刘清念)1,3,4; Shao YF(邵颖峰)1,3; Cai, Yong2; Li, Long1,3; Song F(宋凡)1,3
刊名POLYMERS
出版日期2025-04-18
卷号17期号:8页码:16
关键词stacking pattern CFRP normalized direction factor of bending stiffness (NDFBS) constant bending stiffness space mirrors
DOI10.3390/polym17081098
通讯作者Shao, Yingfeng(shaoyf@lnm.imech.ac.cn) ; Song, Fan(songf@lnm.imech.ac.cn)
英文摘要To achieve laminates with constant bending stiffness to match the high precision requirement of optical systems made of carbon fiber reinforced plastic (CFRP), a new method, the normalized direction factor of bending stiffness (NDFBS), is proposed based on the normalized geometric factor of bending stiffness. Using NDFBS and its variance (VNDFBS), we investigate two common stacking patterns, I and II ([(theta(1))(m)/(theta(2))(m)/& mldr;/(theta(p))(m)](S) and [(theta(1)/theta(2)/& mldr;/theta(p))(m)](S)) and our proposed new stacking pattern, Pattern III ([(theta(1)/theta(2)/& mldr;/theta(p))(S)](m)) based on the initial quasi-isotropic laminates, [theta(1)/theta(2)/& mldr;/theta(p)]. The bending stiffness of the stacking sequence [(45/-45/0/90)(S)](2) tends to be more uniform than that of [45/-45/0/90](2S), and the order of uniformity in bending stiffness of other stacking sequences is [(60/0/-60)(S)](4) > [60/0/-60](4S) > [(60/0/-60)(S)](2) > [60/0/-60](2S). Both theoretical deviations and experimental observations confirm that as the cycle number m increased, the uniformity in bending stiffness is improved gradually, except for that of Pattern I. As the cycle number increased, the speed of Pattern III approaching the constant bending stiffness was faster than that of Patterns I and II. Notably, to achieve a nearly identical uniformity in bending stiffness, only the square root of the cycle number of Pattern II was enough for Pattern III. Based on the same initial laminate and cycle number, Pattern III exhibited more uniform bending stiffness and strength, which are appropriate for precision optical components that require dimensional stability, such as space mirrors.
分类号二类/Q1
WOS关键词SURFACE ACCURACY ; DESIGN ; PLATES
资助项目Chinese Academy of Sciences[XDB0620101] ; Chinese Academy of Sciences[XDB0910301] ; Strategic Priority Research Program of Chinese Academy of Sciences[12232019] ; Strategic Priority Research Program of Chinese Academy of Sciences[12272388] ; National Natural Science Foundation of China ; Youth Innovation Promotion Association CAS
WOS研究方向Polymer Science
语种英语
WOS记录号WOS:001476057300001
资助机构Chinese Academy of Sciences ; Strategic Priority Research Program of Chinese Academy of Sciences ; National Natural Science Foundation of China ; Youth Innovation Promotion Association CAS
其他责任者邵颖峰，宋凡
源URL[http://dspace.imech.ac.cn/handle/311007/101151]  
专题力学研究所_非线性力学国家重点实验室
作者单位1.Univ Chinese Acad Sci, Sch Engn Sci, Beijing 100049, Peoples R China;
2.Aerosp Res Inst Mat & Proc Technol, Beijing 100076, Peoples R China
3.Chinese Acad Sci, State Key Lab Nonlinear Mech LNM, Inst Mech, Beijing 100190, Peoples R China;
4.Syst Design Inst Mech Elect Engn, Beijing 100854, Peoples R China;
推荐引用方式
GB/T 7714		 Liu QN,Shao YF,Cai, Yong,et al. Investigation of a New Stacking Pattern of Laminates with Approximately Constant Bending Stiffness[J]. POLYMERS,2025,17(8):16.
APA 刘清念,邵颖峰,Cai, Yong,Li, Long,&宋凡.(2025).Investigation of a New Stacking Pattern of Laminates with Approximately Constant Bending Stiffness.POLYMERS,17(8),16.
MLA 刘清念,et al."Investigation of a New Stacking Pattern of Laminates with Approximately Constant Bending Stiffness".POLYMERS 17.8(2025):16.

入库方式： OAI收割

来源：力学研究所

浏览0
下载0
收藏0
其他版本

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。