Experimental study of penetration for the analysis of pre-cut free surface parameters in rock materials based on response surface methods
文献类型：期刊论文
| 作者 | Xu,Futong2,3; Lu,Jingjing3; Zhou,Hui3; Fang,Haibo2; He,Longpeng1 |
| 刊名 | Journal of Physics: Conference Series
 |
| 出版日期 | 2024-05-01 |
| 卷号 | 2760期号:1 |
| ISSN号 | 1742-6588 |
| DOI | 10.1088/1742-6596/2760/1/012061 |
| 英文摘要 | Abstract The strength of intact rock material is reduced after it has been cut by techniques such as water jets, based on which the use of disc cutter hobs for rock-breaking by hobbing has good economic results. The kerf is the free surface created by water jet cutting. The kerf depth, kerf spacing, and kerf angle are the main parameters affecting the rock-breaking force of the disc cutter, which can be simplified as the normal penetration load of the indenter. To investigate the effect of prefabricated notch parameters on the penetration load and the sensitivity of the response of penetration load to each factor, response surface tests were carried out on sandstone and granite specimens, and every factor’s impact on the penetration load was examined. The results showed that: (1) The single factor analysis and interactive analysis of the prefabricated kerf parameters for sandstone and granite samples showed that the penetration load was negatively correlated with kerf depth and kerf angle, and positively correlated with kerf spacing within the set range of the test. (2) The difference in rock strength can also affect the penetration load of the samples. In the prefabricated kerf-assisted rock-breaking test, for the high-strength rock samples represented by granite, increasing the prefabricated kerf depth can reduce the penetration load of the samples more effectively. |
| 语种 | 英语 |
| WOS记录号 | IOP:JPCS_2760_1_012061 |
| 出版者 | IOP Publishing |
| 源URL | [http://119.78.100.198/handle/2S6PX9GI/35837]  |
| 专题 | 中科院武汉岩土力学所 |
| 作者单位 | 1.China Construction Eighth Engineering Division Corp., LTD, Shanghai, 200112, China 2.The Second Construction Limited Company of China Construction Eighth Engineering Division, Jinan, 250014, China 3.State Key Laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences, Wuhan, 430071, China |
| 推荐引用方式 GB/T 7714 | Xu,Futong,Lu,Jingjing,Zhou,Hui,et al. Experimental study of penetration for the analysis of pre-cut free surface parameters in rock materials based on response surface methods[J]. Journal of Physics: Conference Series,2024,2760(1). |
| APA | Xu,Futong,Lu,Jingjing,Zhou,Hui,Fang,Haibo,&He,Longpeng.(2024).Experimental study of penetration for the analysis of pre-cut free surface parameters in rock materials based on response surface methods.Journal of Physics: Conference Series,2760(1). |
| MLA | Xu,Futong,et al."Experimental study of penetration for the analysis of pre-cut free surface parameters in rock materials based on response surface methods".Journal of Physics: Conference Series 2760.1(2024). |
入库方式： OAI收割
来源：武汉岩土力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。