Study on direct shear mechanical characteristics of grouted-filled jointed coal using discrete element method
文献类型：期刊论文
| 作者 | Liu, Xuewei2; Tao, Weilong1,2; Liu, Bin2; Wang, Sai2; Deng, Wei1,2; Fan, Ying1 |
| 刊名 | ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS
 |
| 出版日期 | 2024-12-15 |
| 卷号 | 169页码:14 |
| 关键词 | Grouting Jointed coal Shear characteristics Direct shear test Discrete element model |
| ISSN号 | 0955-7997 |
| DOI | 10.1016/j.enganabound.2024.106048 |
| 英文摘要 | Grouting is a widely used technique in underground engineering by enhancing mechanical properties of jointed rock mass. Understanding the shear characteristics of jointed coal mass after grouting reinforcement is crucial for optimizing grouting parameters and advancing grouting mechanism. This study proposed a grout-filled jointed coal (GJC) direct shear discrete element model (GJCS-DEM). The model consists of coal matrix, grout-filled layer, and coal-grout interface. Parallel bond model (PBM) was adopted on intact coal matrix and grout-filled layer, while smooth joint model (SJM) was utilized to model deform behavior of interface in this model. Then, microscopic parameters determination method for SJM in GJCS-DEM has also been introduced and all the parameters for PBM and SJM were calibrated. After that, the proposed approach was validated through the good agreement between strength and failure characteristics of numerical and experimental direct shear test results of specimens with different grouting materials. Finally, the validated GJCS-DEM was applied to investigate effect factors of shear mechanical propertied for GJC specimens. As the grout-filled layer height and joint sawtooth dig angle increases, both peak and residual strength increases, while the failure pattern varies. The work here can offer valuable insights for grouting efficiency improvement in engineering practices. |
| 资助项目 | National Natural Science Foundation of China[U22A20234] ; Hubei Province key research and development project[2023BCB121] ; Wuhan innovation supporting projects[2023020201010079] |
| WOS研究方向 | Engineering ; Mathematics |
| 语种 | 英语 |
| WOS记录号 | WOS:001361918300001 |
| 出版者 | ELSEVIER SCI LTD |
| 源URL | [http://119.78.100.198/handle/2S6PX9GI/43235]  |
| 专题 | 中科院武汉岩土力学所 |
| 通讯作者 | Liu, Bin |
| 作者单位 | 1.Hubei Univ Technol, Sch Civil Engn Architecture & Environm, Wuhan 430068, Peoples R China 2.Chinese Acad Sci, Inst Rock & Soil Mech, State Key Lab Geomech & Geotech Engn, Wuhan 430071, Peoples R China |
| 推荐引用方式 GB/T 7714 | Liu, Xuewei,Tao, Weilong,Liu, Bin,et al. Study on direct shear mechanical characteristics of grouted-filled jointed coal using discrete element method[J]. ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS,2024,169:14. |
| APA | Liu, Xuewei,Tao, Weilong,Liu, Bin,Wang, Sai,Deng, Wei,&Fan, Ying.(2024).Study on direct shear mechanical characteristics of grouted-filled jointed coal using discrete element method.ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS,169,14. |
| MLA | Liu, Xuewei,et al."Study on direct shear mechanical characteristics of grouted-filled jointed coal using discrete element method".ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS 169(2024):14. |
入库方式： OAI收割
来源：武汉岩土力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。