Numerical Simulation and Test Study on Track Welding of QTT
文献类型：期刊论文
| 作者 | Xu, Duoxiang1,5; Xu, Qian1,3,4 ; Li, Lin1,2; Wang, Hui1,3,4; Wang, Na1,3,4
|
| 刊名 | Advances in Astronomy
 |
| 出版日期 | 2023-03-01 |
| 卷号 | 2023页码:5525558 |
| 关键词 | heat-source model residual-stress precision Astronomy & Astrophysics |
| ISSN号 | 1687-7969 |
| DOI | 10.1155/2023/5525558 |
| 产权排序 | 1 |
| 文献子类 | Article |
| 英文摘要 | Considering the stringent requirement of the pointing accuracy up to 2.5 '' of the world's largest full steerable radio telescope, this paper studies the welding experiment of the azimuth track of the antenna. First, the opposite deformation jig and welding process were designed for the QTT's azimuth track. Then, the welding process was numerically simulated using a finite element model. The simulation results show that a better welding effect will be obtained by appropriately reducing the opposite force on the basis of the original. The three deformation processes of the track are regulated by the opposite deformation jig. The results show that the opposite deformation jig designed for QTT's azimuth track can make the amount of deformation and flatness meet the design requirements. Finally, nondestructive testing was carried out to check the welding quality of the track surface and interior. The results show that there are no obvious defects in the welds of the azimuth track. The constraint jig and welding processes designed for QTT are effective and feasible. |
| 语种 | 英语 |
| WOS记录号 | WOS:000961714000001 |
| 源URL | [http://ir.xao.ac.cn/handle/45760611-7/6653]  |
| 专题 | 射电天文研究室_天线技术实验室 新疆天文台_110米口径全可动射电望远镜（SmART）_技术成果 脉冲星研究团组 |
| 通讯作者 | Xu, Qian |
| 作者单位 | 1.Xinjiang Astronomical Observatory, Chinese Academy of Sciences, Urumqi 830011, China; 2.School of Physics and Technology, Xinjiang University, Urumqi 830046, China 3.Key Laboratory of Xinjiang Radio Astrophysics, Urumqi 830011, China; 4.Key Laboratory of Radio Astronomy, Chinese Academy of Sciences, Urumqi 830011, China; 5.University of Chinese Academy of Sciences, Beijing 100049, China; |
| 推荐引用方式 GB/T 7714 | Xu, Duoxiang,Xu, Qian,Li, Lin,et al. Numerical Simulation and Test Study on Track Welding of QTT[J]. Advances in Astronomy,2023,2023:5525558. |
| APA | Xu, Duoxiang,Xu, Qian,Li, Lin,Wang, Hui,&Wang, Na.(2023).Numerical Simulation and Test Study on Track Welding of QTT.Advances in Astronomy,2023,5525558. |
| MLA | Xu, Duoxiang,et al."Numerical Simulation and Test Study on Track Welding of QTT".Advances in Astronomy 2023(2023):5525558. |
入库方式： OAI收割
来源：新疆天文台
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。