中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
Enhancing impact resistance of CFRP by incorporating dynamic non-covalent bonds into epoxy resin networks

文献类型:期刊论文

作者Yang HW(杨昊玮)2,3; Miao ZW(苗振威)3; Yang YX(杨豫新)2,3; Yan WJ(闫维佳)2,3; Ren L(任磊)3; Yang, Zhe1; Guo YC(郭雅悰)3; Yang, Yilin3; Wei YP(魏延鹏)3; Tu H(涂欢)3
刊名COMPOSITES PART B-ENGINEERING
出版日期2025-11-15
卷号307页码:17
关键词Dynamic covalent bond Carbon fiber reinforced polymer Impact damage resistance Epoxy resin
ISSN号1359-8368
DOI10.1016/j.compositesb.2025.112875
通讯作者Wei, Yanpeng(weiyanpeng@imech.ac.cn) ; Tu, Huan(tuhuan@imech.ac.cn)
英文摘要Carbon fiber reinforced epoxy composites have gained widespread application in aerospace and automotive industries due to their exceptional mechanical properties and chemical stability. However, the inherent brittleness of epoxy matrices and the relatively weak interfacial adhesion to carbon fibers significantly constrain the further utilization in extreme conditions. To overcome these obstacles, this study introduced an innovative approach to modify epoxy-based resin by employing polyethylene glycol 200/nano-silica suspensions as dispersion media to incorporate boric acid into the epoxy molecular system. This methodology successfully constructed boron-contained side-chain structures during epoxy curing, where dynamic boron-oxygen (B-O) and boron-nitrogen (B-N) crosslinked networks were established in the epoxy molecular chains and at the resin-fiber interface simultaneously. The dynamic crosslinked network-induced performance enhancement is attributed to three synergistic mechanisms: (1) dynamic bonds participate in the epoxy curing process moderately and thus reduce crosslinking density, which contributed to the improvement of material toughness; (2) the reversible breakage-reformation behavior of dynamic B-O/B-N bonds effectively dissipates impact energy; (3) dynamic covalent bonds at resin-fiber interfaces significantly strengthen adhesive performance and optimize stress transfer efficiency. Experimental results demonstrated that the impact fracture strength of modified epoxy resin was promoted by over 30 %. Furthermore, the novel composite system exhibited outstanding impact damage resistance, where the post-impact residual compressive strength and the fracture strength were improved by 37.2 % and 60.7 %, respectively. This study proposes new design principles to develop high-performance fiberreinforced composites with substantial engineering application potential in aerospace and transportation fields.
分类号一类
WOS关键词MECHANICAL-PROPERTIES ; FRACTURE-TOUGHNESS ; FAILURE-MECHANISM ; CARBON-FIBERS ; ADHESION ; DAMAGE
资助项目National Natural Science Foundation of China[12302496] ; Strategic Priority Research Program of Chinese Academy of Sciences[XDB0620302]
WOS研究方向Engineering ; Materials Science
语种英语
WOS记录号WOS:001555366700005
资助机构National Natural Science Foundation of China ; Strategic Priority Research Program of Chinese Academy of Sciences
其他责任者魏延鹏 ; 涂欢
源URL[http://dspace.imech.ac.cn/handle/311007/103810]  
专题力学研究所_流固耦合系统力学重点实验室(2012-)
作者单位1.Beijing CAS Mech Confidence Sci & Technol Co Ltd, Beijing 100088, Peoples R China
2.Univ Chinese Acad Sci, Sch Engn Sci, Beijing 100049, Peoples R China;
3.Chinese Acad Sci, Key Lab Mech Fluid Solid Coupling Syst, Inst Mech, Beijing 100190, Peoples R China;
推荐引用方式
GB/T 7714
Yang HW,Miao ZW,Yang YX,et al. Enhancing impact resistance of CFRP by incorporating dynamic non-covalent bonds into epoxy resin networks[J]. COMPOSITES PART B-ENGINEERING,2025,307:17.
APA 杨昊玮.,苗振威.,杨豫新.,闫维佳.,任磊.,...&涂欢.(2025).Enhancing impact resistance of CFRP by incorporating dynamic non-covalent bonds into epoxy resin networks.COMPOSITES PART B-ENGINEERING,307,17.
MLA 杨昊玮,et al."Enhancing impact resistance of CFRP by incorporating dynamic non-covalent bonds into epoxy resin networks".COMPOSITES PART B-ENGINEERING 307(2025):17.

入库方式: OAI收割

来源:力学研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。