中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
Graphene nanoplatelets and copper foams for improving passive cooling performance of PCMs in Singapore's tropical climate

文献类型:期刊论文

作者Xiong, Teng1,2; Kua, Harn Wei1; Shah, Kwok Wei1; Hussein, Ghasan Fahim1; Zhang, Bai1,3
刊名JOURNAL OF ENERGY STORAGE
出版日期2024-03-01
卷号80页码:20
关键词Composite phase change material Graphene nanoplatelets Copper foam Passive cooling Tropical climate Convection heat transfer
ISSN号2352-152X
DOI10.1016/j.est.2023.110195
通讯作者Kua, Harn Wei(bdgkuahw@nus.edu.sg)
英文摘要In Singapore's hot tropical climate, phase change materials (PCMs) hold significant promise for year-round passive cooling solutions in buildings. However, the narrow diurnal temperature range of 24-32 degrees C poses a great challenge for pure PCMs with poor thermal conductivity to undergo complete melting-freezing cycles. Herein, we tested two composite PCMs in a self-designed thermal box: (1) paraffin RT28HC/graphene nanoplatelets (GNP-PCMs) and (2) paraffin RT28HC/copper foam (CF-PCMs). The passive cooling performance of the composite PCMs was evaluated based on their charging power at 32 degrees C and discharging power at 24 degrees C. The focus is on convection heat transfer between the composite PCMs and ambient air, with considering various factors, including GNPs content (0.1-0.9 wt%), CF pore density (40 pores per inch (PPI) and 70 PPI), airflow rate (natural convection and forced convection), and orientation (horizontal and vertical). The results indicate that a minimum temperature range of 26.6-30.3 degrees C is necessary for complete melting-freezing cycles. The effect of GNPs content is more sensitive to orientation, whereas the effect of CF pore density is more affected by airflow rate. In all cases, the CF-PCMs exhibit superior temperature uniformity than the GNP-PCMs. Under forced convection, the charging power and discharging power of pure PCM reached a maximum of 110.8 and 163.5 W/m2, respectively. The addition of GNPs enhanced the charging power and discharging power of pure PCM by up to 14.2 % and 10.2 %, respectively. Moreover, the incorporation of CF boosted the charging power and discharging power of pure PCM by up to 75.1 % and 64.3 %, respectively.
WOS关键词PHASE-CHANGE MATERIALS ; THERMAL-ENERGY STORAGE ; LOAD REDUCTION ; HEAT-TRANSFER ; CONDUCTIVITY ; ENHANCEMENT ; COMPOSITE ; BUILDINGS ; BEHAVIOR
资助项目Department of the Built Environment, College of Design and Engineering, National University of Singapore[E-471-00-0009-02]
WOS研究方向Energy & Fuels
语种英语
WOS记录号WOS:001165327000001
出版者ELSEVIER
资助机构Department of the Built Environment, College of Design and Engineering, National University of Singapore
源URL[http://ir.giec.ac.cn/handle/344007/40952]  
专题中国科学院广州能源研究所
通讯作者Kua, Harn Wei
作者单位1.Natl Univ Singapore, Coll Design & Engn, Dept Built Environm, Singapore 117566, Singapore
2.Chinese Acad Sci, Guangzhou Inst Energy Convers, Guangzhou 510640, Peoples R China
3.Changsha Univ Sci & Technol, Sch Civil Engn, Changsha 410114, Peoples R China
推荐引用方式
GB/T 7714
Xiong, Teng,Kua, Harn Wei,Shah, Kwok Wei,et al. Graphene nanoplatelets and copper foams for improving passive cooling performance of PCMs in Singapore's tropical climate[J]. JOURNAL OF ENERGY STORAGE,2024,80:20.
APA Xiong, Teng,Kua, Harn Wei,Shah, Kwok Wei,Hussein, Ghasan Fahim,&Zhang, Bai.(2024).Graphene nanoplatelets and copper foams for improving passive cooling performance of PCMs in Singapore's tropical climate.JOURNAL OF ENERGY STORAGE,80,20.
MLA Xiong, Teng,et al."Graphene nanoplatelets and copper foams for improving passive cooling performance of PCMs in Singapore's tropical climate".JOURNAL OF ENERGY STORAGE 80(2024):20.

入库方式: OAI收割

来源:广州能源研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。