Mechanical behavior and deformation mechanism of nano/ultrafine grained austenitic stainless steel at cryogenic, room, and elevated temperatures
文献类型：期刊论文
| 作者 | Lei, Chengshuai1,2; Liu, Hongwei1; Deng, Xiangtao2; Li, Xiaolin3; Wang, Zhaodong2 |
| 刊名 | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
 |
| 出版日期 | 2025-03-01 |
| 卷号 | 925页码:11 |
| 关键词 | Nano/ultrafine grained steel Stacking fault energy Deformation mechanism Deformation temperature |
| ISSN号 | 0921-5093 |
| DOI | 10.1016/j.msea.2025.147870 |
| 通讯作者 | Deng, Xiangtao(dengxiangtao123@163.com) ; Li, Xiaolin(xiaolinli@nwpu.edu.cn) |
| 英文摘要 | Nano/ultrafine-grained (Nano/UFG) austenitic stainless steel (ASS) has attracted considerable attention in recent years due to its excellent combination of ultra-high strength and good ductility. However, few studies have focused on its mechanical response at cryogenic and elevated temperatures. In this study, the mechanical properties and microstructure evolution of Nano/UFG steel during tensile testing at temperatures ranging from -60 to 100 degrees C were systematically investigated. The aim was to reveal the mechanical response of Nano/UFG steel at different temperatures and the correlation between mechanical behavior and deformation mechanism. The results show that the yield strength of Nano/UFG ASS is almost unaffected by the deformation temperature, but the ultimate tensile strength (UTS) and tensile elongation (TE) vary significantly at different temperatures. When deformed at temperatures lower than 60 degrees C, Nano/UFG ASS achieves relatively high UTS and TE due to the strong hardening caused by martensitic transformation and deformation twinning. However, when deformed at 100 degrees C, the tensile ductility decreases dramatically due to the inhibition of dislocation gliding by the small grain size. Microstructural characterization reveals that the deformation mechanism of Nano/UFG ASS is influenced by both the stacking fault energy and grain size. The dominant deformation mechanism changes from deformationinduced gamma -> alpha ' martensitic transformation at -60 degrees C to a combination of martensitic transformation and deformation twining at 20 degrees C, further to martensitic transformation at 60 degrees C, and finally to stacking faults at 100 degrees C. Additionally, the differences in the deformation mechanism between coarse-grained ASS and Nano/UFG ASS at different temperatures are also clarified. |
| 资助项目 | National Natural Science Foundation of China[52201053] ; National Natural Science Foundation of China[52274380] ; National Natural Science Foundation of China[U23A20613] ; National Basic Research Program, China[2022YFB3705300] |
| WOS研究方向 | Science & Technology - Other Topics ; Materials Science ; Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:001405336800001 |
| 出版者 | ELSEVIER SCIENCE SA |
| 资助机构 | National Natural Science Foundation of China ; National Basic Research Program, China |
| 源URL |  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Deng, Xiangtao; Li, Xiaolin |
| 作者单位 | 1.Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, Shenyang 110016, Peoples R China 2.Northeastern Univ, State Key Lab Rolling & Automat, Shenyang 110004, Peoples R China 3.Northwestern Polytech Univ, Ctr Adv Lubricat & Seal Mat, State Key Lab Solidificat Proc, Xian 710072, Peoples R China |
| 推荐引用方式 GB/T 7714 | Lei, Chengshuai,Liu, Hongwei,Deng, Xiangtao,et al. Mechanical behavior and deformation mechanism of nano/ultrafine grained austenitic stainless steel at cryogenic, room, and elevated temperatures[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2025,925:11. |
| APA | Lei, Chengshuai,Liu, Hongwei,Deng, Xiangtao,Li, Xiaolin,&Wang, Zhaodong.(2025).Mechanical behavior and deformation mechanism of nano/ultrafine grained austenitic stainless steel at cryogenic, room, and elevated temperatures.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,925,11. |
| MLA | Lei, Chengshuai,et al."Mechanical behavior and deformation mechanism of nano/ultrafine grained austenitic stainless steel at cryogenic, room, and elevated temperatures".MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 925(2025):11. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。