Comparative Study on Online Prediction of TP2 Rolled Copper Tube Wall Thickness Based on Different Proxy Models
文献类型：期刊论文
| 作者 | Yue, Fengli1; Sha, Zhuo1; Sun, Hongyun1; Liu, Huan1; Chen, Dayong2,3; Liu, Jinsong1,2,3; Chen, Chuanlai3 |
| 刊名 | MATERIALS
 |
| 出版日期 | 2024-12-01 |
| 卷号 | 17期号:23页码:24 |
| 关键词 | joint drawing ultrasonic testing numerical simulation neural network |
| DOI | 10.3390/ma17235685 |
| 通讯作者 | Yue, Fengli(flyue@163.com) |
| 英文摘要 | The wall thickness of the TP2 copper tube casting billet is not uniform after a three-roll planetary rotational rolling, which affects the wall thickness uniformity of the copper tube in the subsequent process. In order to study the influence of wall thickness at different positions of copper pipe after rolling on the wall thickness of copper pipe after joint drawing, an online ultrasonic test platform was used to measure the wall thickness of copper pipe after tying, and based on the test data, a finite element model of copper pipe billet was established, and the numerical simulation of joint drawing wall thickness was conducted. Based on the results of the ultrasonic testing experiment and finite element simulation, different neural network models were used to predict the joint tensile wall thickness with the data of the ultrasonic testing experiment as input and the results of finite element simulation as output. The prediction effect of different neural network models was compared, and the results showed that the prediction and fitting effect of the SVM model was better, but overfitting occurred during the fitting process. Furthermore, particle swarm optimization is used to optimize the penalty parameter C and the kernel parameter g in the SVM model. Compared with the traditional SVM model, the PSO-SVM model is more suitable for the prediction of joint tensile wall thickness, which can better guide the production to solve this problem. |
| 资助项目 | Basic Research Projects of Liaoning Provincial Department of Education ; Foundation Project - Science and Technology Plan Project of Chang Zhou[CQ20220057] ; [LJKMZ20220591] |
| WOS研究方向 | Chemistry ; Materials Science ; Metallurgy & Metallurgical Engineering ; Physics |
| 语种 | 英语 |
| WOS记录号 | WOS:001376441900001 |
| 出版者 | MDPI |
| 资助机构 | Basic Research Projects of Liaoning Provincial Department of Education ; Foundation Project - Science and Technology Plan Project of Chang Zhou |
| 源URL |  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Yue, Fengli |
| 作者单位 | 1.Shenyang Ligong Univ, Automot & Transportat Coll, Shenyang 110159, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Shi Changxu Mat Innovat Ctr, Shenyang 110016, Peoples R China 3.Changzhou Enreach Copper Co Ltd, Changzhou 213149, Peoples R China |
| 推荐引用方式 GB/T 7714 | Yue, Fengli,Sha, Zhuo,Sun, Hongyun,et al. Comparative Study on Online Prediction of TP2 Rolled Copper Tube Wall Thickness Based on Different Proxy Models[J]. MATERIALS,2024,17(23):24. |
| APA | Yue, Fengli.,Sha, Zhuo.,Sun, Hongyun.,Liu, Huan.,Chen, Dayong.,...&Chen, Chuanlai.(2024).Comparative Study on Online Prediction of TP2 Rolled Copper Tube Wall Thickness Based on Different Proxy Models.MATERIALS,17(23),24. |
| MLA | Yue, Fengli,et al."Comparative Study on Online Prediction of TP2 Rolled Copper Tube Wall Thickness Based on Different Proxy Models".MATERIALS 17.23(2024):24. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。