Parametric Investigation of the Effects of Electrical Discharge Machining on Plain D2 Steel
文献类型：期刊论文
| 作者 | Hassan, Abual1; Mushtaq, Ray Tahir2; Mashood Khan, Aqib3; Anwar, Saqib4 |
| 刊名 | METALS
 |
| 出版日期 | 2023-12-01 |
| 卷号 | 13期号:12页码:23 |
| 关键词 | electrical discharge machining dielectric medium non-conventional machining process parameters material removal rate |
| DOI | 10.3390/met13121964 |
| 通讯作者 | Mushtaq, Ray Tahir(tahirmushtaqray@mail.nwpu.edu.cn) ; Mashood Khan, Aqib(dr.aqib@nuaa.edu.cn) |
| 英文摘要 | Electrical discharge machining (EDM) has emerged as a pivotal non-conventional production technique due to its unique capability to machine without the cutting tool's physical contact with the workpiece, making it apt for brittle, delicate, and complex materials. This research delved into the influence of operational parameters-pulse duration (Ton), peak current (Ip), duty cycle (T), and gap voltage (Vg)-on machining attributes, namely material removal rate (MRR), electrode wear rate (EWR), and radial overcut (ROC) for AISI D2 steel. Utilizing the Taguchi L9 orthogonal array for experimental design, nine experiments were conducted, followed by signal-to-noise ratio (S/N ratio) computations. Key findings highlighted a 4.02 dB improvement in the S/N ratio for MRR, leading to a 29.13% improvement; a 10.35 dB enhancement in the S/N ratio for EWR, resulting in a 33.33% reduction; and a 2.20 dB increase in the S/N ratio for ROC, leading to a 28.57% increment. ANOVA analyses further underscored the predominant influence of all four parameters. The significance of these findings lies in optimizing the EDM process for increased efficiency, reduced tool wear, and enhanced precision, potentially leading to cost savings and improved production quality in industrial applications. |
| 资助项目 | King Saud University[RSPD2023R702] ; King Saud University, Riyadh, Saudi Arabia |
| WOS研究方向 | Materials Science ; Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:001131317200001 |
| 出版者 | MDPI |
| 资助机构 | King Saud University ; King Saud University, Riyadh, Saudi Arabia |
| 源URL |  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Mushtaq, Ray Tahir; Mashood Khan, Aqib |
| 作者单位 | 1.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China 2.Northwestern Polytech Univ, Bioaddit Mfg Univ, Enterprise Joint Res Ctr Shaanxi Prov, Dept Ind Engn, Xian 710072, Peoples R China 3.Nanjing Univ Aeronaut & Astronaut, Coll Mech & Elect Engn, Nanjing 210016, Peoples R China 4.King Saud Univ, Coll Engn, Ind Engn Dept, POB 800, Riyadh 11421, Saudi Arabia |
| 推荐引用方式 GB/T 7714 | Hassan, Abual,Mushtaq, Ray Tahir,Mashood Khan, Aqib,et al. Parametric Investigation of the Effects of Electrical Discharge Machining on Plain D2 Steel[J]. METALS,2023,13(12):23. |
| APA | Hassan, Abual,Mushtaq, Ray Tahir,Mashood Khan, Aqib,&Anwar, Saqib.(2023).Parametric Investigation of the Effects of Electrical Discharge Machining on Plain D2 Steel.METALS,13(12),23. |
| MLA | Hassan, Abual,et al."Parametric Investigation of the Effects of Electrical Discharge Machining on Plain D2 Steel".METALS 13.12(2023):23. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。