中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
Influence of stabilization heat treatment temperature on microstructure and stress rupture properties of Inconel 706 superalloy

文献类型:期刊论文

作者Zhang, Sha1,2; Jia, Dan3; Zhao, Dongqing4; Zeng, Lingrong5; Zhang, Lin2; Zeng, Guangsheng1; Qu, Xuanhui2; Sun, Wenru3
刊名JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
出版日期2023-11-01
卷号27页码:7998-8007
关键词Ni-based superalloy Inconel 706 Stabilization heat treatment temperature eta-phase gamma' /gamma '' coprecipitate Stress rupture property
ISSN号2238-7854
DOI10.1016/j.jmrt.2023.11.226
通讯作者Zhang, Sha(szhang10b@alum.imr.ac.cn) ; Qu, Xuanhui(quxh@ustb.edu.cn)
英文摘要Although the stabilizing heat treatment between solution treatment and aging treatment in Inconel 706 alloy is important to improve its stress rupture life, the influence of stabilization heat treatment temperature on the microstructure and stress rupture properties has not been well understood. In this study, heat treatments consisting of three stabilization temperatures (800 degrees C, 845 degrees C, and 880 degrees C) were performed in Inconel 706 alloy. The results showed that the stress rupture properties were improved with the increase of stabilization temperature. When compared with stabilization at 800 degrees C, the alloy stabilized at 880 degrees C exhibited a 96% increase in stress rupture life and a 110% increase in elongation. Furthermore, increasing the stabilization temperature led to the increased amount of eta phase at grain boundaries. The eta phase appeared in granular, rod-shaped or needle-shaped morphology. The microstructure in the grain interior exhibited compact gamma'/gamma" coprecipitates in the samples stabilized at 800 degrees C and 845 degrees C, while that showed noncompact gamma'/gamma" coprecipitates in the sample stabilized at 880 degrees C. The formation of 2.34 vol% eta phase was found to be beneficial for the stress rupture properties. The improvement in stress rupture properties was ascribed to the presence of eta phase and the associated precipitate-free zones at grain boundaries.
资助项目National Natural Science Foun-dation of China[52173034] ; National Natural Science Foun-dation of China[51973056] ; Science and Technology Innovation Program of Hunan Province of China[2023JJ30081] ; Natural Science Foundation of Sichuan Province of China[2022NSFSC2007]
WOS研究方向Materials Science ; Metallurgy & Metallurgical Engineering
语种英语
WOS记录号WOS:001134667800001
出版者ELSEVIER
资助机构National Natural Science Foun-dation of China ; Science and Technology Innovation Program of Hunan Province of China ; Natural Science Foundation of Sichuan Province of China
源URL  
专题金属研究所_中国科学院金属研究所
通讯作者Zhang, Sha; Qu, Xuanhui
作者单位1.Changsha Univ, Coll Mech & Elect Engn, Changsha 410022, Peoples R China
2.Univ Sci & Technol Beijing, Inst Adv Mat & Technol, Beijing Adv Innovat Ctr Mat Genome Engn, Beijing 100083, Peoples R China
3.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China
4.Qilu Univ Technol, Adv Mat Inst, Shandong Acad Sci, Shandong Prov Key Lab High Strength Lightweight Me, Jinan 250014, Peoples R China
5.Chengdu Univ, Sch Mech Engn, Chengdu 610106, Peoples R China
推荐引用方式
GB/T 7714
Zhang, Sha,Jia, Dan,Zhao, Dongqing,et al. Influence of stabilization heat treatment temperature on microstructure and stress rupture properties of Inconel 706 superalloy[J]. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T,2023,27:7998-8007.
APA Zhang, Sha.,Jia, Dan.,Zhao, Dongqing.,Zeng, Lingrong.,Zhang, Lin.,...&Sun, Wenru.(2023).Influence of stabilization heat treatment temperature on microstructure and stress rupture properties of Inconel 706 superalloy.JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T,27,7998-8007.
MLA Zhang, Sha,et al."Influence of stabilization heat treatment temperature on microstructure and stress rupture properties of Inconel 706 superalloy".JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T 27(2023):7998-8007.

入库方式: OAI收割

来源:金属研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。