High-Speed Rubbing Behavior of Abrasive Coating Coated on Titanium Alloy Blade Tips
文献类型：期刊论文
| 作者 | Gu, Wenshuang1,2; Yang, Shuai1,2; Zhang, Shiyi1,2; Pei, Zhiliang1; Xue, Weihai1; Duan, Deli1; Gong, Jun1; Sun, Chao1 |
| 刊名 | ACTA METALLURGICA SINICA-ENGLISH LETTERS
 |
| 出版日期 | 2024-01-19 |
| 页码 | 14 |
| 关键词 | Gas turbine sealing Abrasive coating High-speed rubbing Material transfer Abradable coating |
| ISSN号 | 1006-7191 |
| DOI | 10.1007/s40195-023-01651-3 |
| 通讯作者 | Pei, Zhiliang(zlpei@imr.ac.cn) ; Gong, Jun(jgong@imr.ac.cn) |
| 英文摘要 | In aero-engines, abrasive coatings are typically utilized to protect the blade tip from excessive wear caused by the harder abradable sealing coating and thereby improve the sealing performance of engines. Therefore, a Ni/cBN abrasive coating was prepared on titanium alloy using electrodeposition. The high-speed rubbing tests with a linear velocity of 350 m/s and different incursion rates were performed to investigate the effect of the Ni/cBN abrasive coating on the wear behavior against NiCrAl/diatomite seal coating. Results showed that melting wear and adhesive transfer occurred on the bare blades, causing the bare blade to suffer excessive wear. While the Ni/cBN abrasive coating exhibited superior wear resistance and cutting performance. The cBN grits pullout, the abrasion of Ni matrix and transfer of seal coating to the cBN grits were the main wear mechanism of the Ni/cBN abrasive coating. Additionally, it was found that the relationship between the incursion rate and high-speed rubbing behavior is quite different for the bare blade and Ni/cBN coating. The reason for the difference in wear behavior of bare blade and Ni/cBN coating at different incursion rates was discussed in detail. |
| 资助项目 | National Science and Technology Major Project[2017-VII-0012-0108] |
| WOS研究方向 | Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:001145981500002 |
| 出版者 | CHINESE ACAD SCIENCES, INST METAL RESEARCH |
| 资助机构 | National Science and Technology Major Project |
| 源URL |  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Pei, Zhiliang; Gong, Jun |
| 作者单位 | 1.Chinese Acad Sci, Shi Changxu Innovat Ctr Adv Mat, Inst Met Res, Shenyang 110016, Peoples R China 2.Univ Sci & Technol China, Sch Mat Sci & Engn, Shenyang 110016, Peoples R China |
| 推荐引用方式 GB/T 7714 | Gu, Wenshuang,Yang, Shuai,Zhang, Shiyi,et al. High-Speed Rubbing Behavior of Abrasive Coating Coated on Titanium Alloy Blade Tips[J]. ACTA METALLURGICA SINICA-ENGLISH LETTERS,2024:14. |
| APA | Gu, Wenshuang.,Yang, Shuai.,Zhang, Shiyi.,Pei, Zhiliang.,Xue, Weihai.,...&Sun, Chao.(2024).High-Speed Rubbing Behavior of Abrasive Coating Coated on Titanium Alloy Blade Tips.ACTA METALLURGICA SINICA-ENGLISH LETTERS,14. |
| MLA | Gu, Wenshuang,et al."High-Speed Rubbing Behavior of Abrasive Coating Coated on Titanium Alloy Blade Tips".ACTA METALLURGICA SINICA-ENGLISH LETTERS (2024):14. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。