The Influence of Tempering Parameters on the Microstructure, Mechanical Property, and the Corresponding Strengthening Mechanism of Metastable 301 Austenitic Stainless Steel
文献类型：期刊论文
| 作者 | Zhao, Liyuan1; Yang, Jiawei1; Tian, Lei1; Li, Xiaolin1; Lei, Chengshuai2; Wang, Haifeng1 |
| 刊名 | STEEL RESEARCH INTERNATIONAL
 |
| 出版日期 | 2024-02-03 |
| 页码 | 12 |
| 关键词 | deformation mechanisms ductile fractures grain refinement strengthening quasiheterostructures reverse transformations of martensite |
| ISSN号 | 1611-3683 |
| DOI | 10.1002/srin.202300674 |
| 通讯作者 | Li, Xiaolin(xiaolinli@nwpu.edu.cn) ; Lei, Chengshuai(cslei@imr.ac.cn) |
| 英文摘要 | Metastable austenitic stainless steels (MASS) are widely used in various industrial applications due to their exceptional mechanical properties. The microstructure of MASS can be regulated through severe plastic deformation, heat treatments, and surface treatments to achieve further improvement of mechanical properties. Herein, nanograin and quasiheterostructure are prepared by cold rolling and annealing process in Fe-17Cr-6Ni MASS. The mechanical response, deformation mechanism, and strengthening contribution of the two steels with representative microstructure are studied. The results indicate that nanograin austenitic steel (803 MPa, 22%) has superior yield strength and similar ductility compared with that of quasiheterostructure steel (600 MPa, 25%). In the nanograin steel, the deformation mechanism is mainly dislocation slip and deformation-induced martensite transformation, while in quasiheterostructure steel, the deformation twinning is also included for the relative lower stacking fault energy in the coarse grain. The yield strength of nanograin structural steel is about 200 MPa higher than that of quasiheterostructure steel, which can be attributed to the differences in grain refinement strengthening, phase-transformation strengthening, and precipitation strengthening of Cu particles. The findings presented in this study are informative for modulating MASS properties and ultimately improving the lifespan in a variety of industrial settings. Through the cold rolling and annealing process, the prior metastable 301 austenitic stainless steel grains are refined to prepare nanograin and quasiheterostructure, respectively. Compared with the latter, the nanograin austenitic steel exhibits superior strength and ductility, and its excellent mechanical properties are mainly derived from grain refinement strengthening, phase-transformation strengthening, and precipitation strengthening of Cu particles.image (c) 2024 WILEY-VCH GmbH |
| 资助项目 | National Key Research and Development Program ; National Science Foundation of China[52374403] ; National Science Foundation of China[U23A20613] ; National Science Foundation of China[52004224] ; National Science Foundation of China[2023-T-009] ; State Key Laboratory of Solidification Processing[2021-TS-10] ; Northwestern Polytechnical University ; [2022YFB3705300] |
| WOS研究方向 | Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:001155606000001 |
| 出版者 | WILEY-V C H VERLAG GMBH |
| 资助机构 | National Key Research and Development Program ; National Science Foundation of China ; State Key Laboratory of Solidification Processing ; Northwestern Polytechnical University |
| 源URL |  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Li, Xiaolin; Lei, Chengshuai |
| 作者单位 | 1.Northwestern Polytech Univ, Sch Mat Sci, Xian 710072, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Shenyang 110819, Peoples R China |
| 推荐引用方式 GB/T 7714 | Zhao, Liyuan,Yang, Jiawei,Tian, Lei,et al. The Influence of Tempering Parameters on the Microstructure, Mechanical Property, and the Corresponding Strengthening Mechanism of Metastable 301 Austenitic Stainless Steel[J]. STEEL RESEARCH INTERNATIONAL,2024:12. |
| APA | Zhao, Liyuan,Yang, Jiawei,Tian, Lei,Li, Xiaolin,Lei, Chengshuai,&Wang, Haifeng.(2024).The Influence of Tempering Parameters on the Microstructure, Mechanical Property, and the Corresponding Strengthening Mechanism of Metastable 301 Austenitic Stainless Steel.STEEL RESEARCH INTERNATIONAL,12. |
| MLA | Zhao, Liyuan,et al."The Influence of Tempering Parameters on the Microstructure, Mechanical Property, and the Corresponding Strengthening Mechanism of Metastable 301 Austenitic Stainless Steel".STEEL RESEARCH INTERNATIONAL (2024):12. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。