中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
首页 机构 成果 学者
  
  1. CAS IR Grid
  2. 金属研究所
  3. 中国科学院金属研究所
Tailoring microstructures and mechanical properties of Zr45Ti15Nb30Ta10 refractory complex concentrated alloy using warm-rolling

文献类型：期刊论文

作者Zhou, Yongkang1,2,3; Zeng, Shuai1,2,3; Zhang, Hongwei1,3; Zhang, Haifeng1,3,4; Gao, Hongquan5; Zhao, Hongwei5; Zhu, Zhengwang1,3,4
刊名JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
出版日期2024-07-10
卷号187页码:101-112
关键词Refractory complex concentrated alloy Warm rolling Heterogeneous structure Mechanical properties
ISSN号1005-0302
DOI10.1016/j.jmst.2023.11.057
通讯作者Zhu, Zhengwang(zwzhu@imr.ac.cn)
英文摘要Compared with cold rolling, warm rolling can significantly reduce or completely eliminate microstructure damage to regulate the microstructure of the material, which is an effective method to improve the mechanical properties of the material. However, the effect of warm rolling on refractory complex concentrated alloys (RCCAs) has rarely been reported. This research examines how warm rolling influences the microstructure, texture, and mechanical properties of the Zr45Ti15Nb30Ta10 RCCA. The RCCA was warmrolled to a 75 % reduction in thickness at 650 degrees C (two-phase zone) and then annealed at 10 0 0 degrees C for 1 h. To highlight the advantages of warm rolling, a comparison was conducted with similarly deformed and annealed cold-rolled RCCA. The warm-rolled RCCA exhibits a layered heterogeneous structure and induces the precipitation of the (Nb, Ta)-enriched bcc2 phase. The deformation texture of warm-rolled RCCA is weaker than that of cold-rolled RCCA, which is attributed to localized deformation inhomogeneity. After annealing, warm rolling resulted in a remarkable increase in the yield strength of the RCCA, i.e., from 861 MPa to 1071 MPa; meanwhile, moreover, the tensile plasticity was almost identical. Warm rolling leads to a change in plastic deformation of the RCCA from dislocation cross -slip to one dominated by the interaction of dislocations with subgrain boundaries as well as the bcc2 phase. The back tress generated by the heterogeneous structure induced by warm rolling is also effective in increasing the yield strength of the RCCA. The remarkably layered heterogeneous structure, subgrain boundaries and textures result in warm-rolled RCCA with optimal strength-ductility combination. Our results provide an effective processing approach for tailoring the microstructure and mechanical properties of RCCAs. (c) 2024 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.
资助项目National Natu-ral Science Foundation of China[52074257] ; Chinese Academy of Sciences[ZDBS-LY- JSC023]
WOS研究方向Materials Science ; Metallurgy & Metallurgical Engineering
语种英语
WOS记录号WOS:001168149600001
出版者JOURNAL MATER SCI TECHNOL
资助机构National Natu-ral Science Foundation of China ; Chinese Academy of Sciences
源URL  
专题金属研究所_中国科学院金属研究所
通讯作者Zhu, Zhengwang
作者单位1.Chinese Acad Sci, Shi Changxu Innovat Ctr Adv Mat, Inst Met Res, Shenyang 110016, Peoples R China
2.Univ Sci & Technol China, Sch Mat Sci & Engn, Shenyang 110016, Peoples R China
3.Chinese Acad Sci, CAS Key Lab Nucl Mat & Safety Assessment, Inst Met Res, Shenyang 110016, Peoples R China
4.Northeastern Univ, Sch Met, Shenyang 110819, Peoples R China
5.Unit 96901 PLA, Beijing 100094, Peoples R China
推荐引用方式
GB/T 7714		 Zhou, Yongkang,Zeng, Shuai,Zhang, Hongwei,et al. Tailoring microstructures and mechanical properties of Zr45Ti15Nb30Ta10 refractory complex concentrated alloy using warm-rolling[J]. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,2024,187:101-112.
APA Zhou, Yongkang.,Zeng, Shuai.,Zhang, Hongwei.,Zhang, Haifeng.,Gao, Hongquan.,...&Zhu, Zhengwang.(2024).Tailoring microstructures and mechanical properties of Zr45Ti15Nb30Ta10 refractory complex concentrated alloy using warm-rolling.JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,187,101-112.
MLA Zhou, Yongkang,et al."Tailoring microstructures and mechanical properties of Zr45Ti15Nb30Ta10 refractory complex concentrated alloy using warm-rolling".JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY 187(2024):101-112.

入库方式： OAI收割

来源：金属研究所

浏览0
下载0
收藏0
其他版本

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。