Cold spraying of Al-5Si/Al2O3 composite coatings on AZ31 Mg alloy: Microstructure, adhesion strength, and tribological properties
文献类型:期刊论文
| 作者 | Ullah, Nasir1,2; Tariq, Naeem Ul Haq3; Zhao, Lijia1,2; Ullah, Wasi1,2; Cui, Xinyu1; Wang, Jiqiang1; Xiong, Tianying1 |
| 刊名 | SURFACE & COATINGS TECHNOLOGY
![]() |
| 出版日期 | 2024-03-15 |
| 卷号 | 479页码:11 |
| 关键词 | Composite coating Al-5Si Cold spray EBSD Wear |
| ISSN号 | 0257-8972 |
| DOI | 10.1016/j.surfcoat.2024.130543 |
| 通讯作者 | Wang, Jiqiang(jqwang11s@imr.ac.cn) |
| 英文摘要 | To improve the wear resistance of commercial AZ31 Mg alloy, two types of dense and thick composite coatings were prepared on AZ31 Mg alloy by means of cold -spray technology. For this purpose, Al2O3 particles with different morphology (round and irregular) were separately added to the Al-5Si feedstock. The morphological effects of Al2O3 on the microstructure, adhesion strength, hardness, and tribological properties of the coatings were comprehensively studied. Microstructural features of the coatings were examined by means of optical microscopy (OM), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and electron backscatter diffraction (EBSD). The analysis reveals that most of the grains in both coatings are ultrafine, and approximately half of the total grain boundary length is composed of low -angle grain boundaries. Wear, hardness, and pull -off tests showed that both types of Al2O3 particles have a positive impact on porosity, adhesion, hardness, and wear resistance of the composite coatings. Compared to round Al2O3, irregular Al2O3 particles exhibit better retention in the coating, thereby resulting in a higher hardness and wear resistance. |
| 资助项目 | National Natural Science Foundation of China[52271078] |
| WOS研究方向 | Materials Science ; Physics |
| 语种 | 英语 |
| WOS记录号 | WOS:001196504200001 |
| 出版者 | ELSEVIER SCIENCE SA |
| 资助机构 | National Natural Science Foundation of China |
| 源URL | ![]() |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Wang, Jiqiang |
| 作者单位 | 1.Chinese Acad Sci, Shi Changxu Innovat Ctr Adv Mat, Inst Met Res, 72 Wenhua Rd, Shenyang 110016, Peoples R China 2.Univ Sci & Technol China, Sch Mat Sci & Engn, 72 Wenhua Rd, Shenyang 110016, Peoples R China 3.Pakistan Inst Engn & Appl Sci PIEAS, Dept Met & Mat Engn, Islamabad 45650, Pakistan |
| 推荐引用方式 GB/T 7714 | Ullah, Nasir,Tariq, Naeem Ul Haq,Zhao, Lijia,et al. Cold spraying of Al-5Si/Al2O3 composite coatings on AZ31 Mg alloy: Microstructure, adhesion strength, and tribological properties[J]. SURFACE & COATINGS TECHNOLOGY,2024,479:11. |
| APA | Ullah, Nasir.,Tariq, Naeem Ul Haq.,Zhao, Lijia.,Ullah, Wasi.,Cui, Xinyu.,...&Xiong, Tianying.(2024).Cold spraying of Al-5Si/Al2O3 composite coatings on AZ31 Mg alloy: Microstructure, adhesion strength, and tribological properties.SURFACE & COATINGS TECHNOLOGY,479,11. |
| MLA | Ullah, Nasir,et al."Cold spraying of Al-5Si/Al2O3 composite coatings on AZ31 Mg alloy: Microstructure, adhesion strength, and tribological properties".SURFACE & COATINGS TECHNOLOGY 479(2024):11. |
入库方式: OAI收割
来源:金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。

