Austenite decomposition behavior adjacent to δ-ferrite in a Si-modified Fe-Cr-Ni austenitic stainless steel during thermal aging at 550 °C
文献类型：期刊论文
| 作者 | Xie, Ang1,2; Chen, Shenghu1; Chen, Sihan1; Jiang, Haichang1; Rong, Lijian1 |
| 刊名 | ACTA MATERIALIA
 |
| 出版日期 | 2024-06-15 |
| 卷号 | 272页码:19 |
| 关键词 | Si-modified austenitic stainless steel Thermal aging delta-ferrite Austenite decomposition Fracture behavior |
| ISSN号 | 1359-6454 |
| DOI | 10.1016/j.actamat.2024.119948 |
| 通讯作者 | Chen, Shenghu(chensh@imr.ac.cn) ; Rong, Lijian(ljrong@imr.ac.cn) |
| 英文摘要 | The delta-ferrite decomposition has been widely reported in conventional Fe-Cr-Ni austenitic stainless steel during thermal aging. However, a novel phenomenon is found in a Si-modified austenitic stainless steel, that delta-ferrite decomposition is suppressed, replaced by the decomposition of adjacent austenite. Herein, the decomposition behavior of austenite adjacent to delta-ferrite and its effect on impact toughness in a Si-modified austenitic stainless steel during aging at 550 degrees C up to 3000 h have been investigated. During thermal aging, austenite adjacent to delta-ferrite is decomposed in the following sequence: (1) gamma -> M23C6 + alpha transformation takes place. The preferential formation of secondary M23C6 carbides not only rejects Si atoms into the surrounding austenite but also produces a C-depleted zone. The transformation of austenite to ferrite is induced in the Si-riched and C-depleted microzone. (2) The growth of secondary M23C6 carbides induces a continuous rejection of Ni and Si atoms into M23C6/gamma and M23C6/alpha interfaces, and the strong attractive interaction between Ni and Si provides the chemical driving force for nucleation of M6C carbides and G-phase. (3) With prolonged aging time, the lower C, high Ni, and high Si concentrations in the frontier of decomposed austenite will promote the preferential precipitation of M6C carbides rather than M23C6 carbides. During impact deformation, microcracks caused by strain incompatibility between secondary M23C6 and alpha-ferrite, resulting in a slight decrease in impact toughness. As austenite decomposition proceeds, the higher strain incompatibility across M6C/alpha interfaces leads to brittle cleavage fracture, resulting in a significant decrease in impact toughness. |
| 资助项目 | China[U23B2074] ; China[51871218] ; Youth Innovation Promotion Association, CAS[2018227] ; LingChuang Research Project of China National Nuclear Corporation ; CNNC Science Fund for Talented Young Scholars |
| WOS研究方向 | Materials Science ; Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:001235072800001 |
| 出版者 | PERGAMON-ELSEVIER SCIENCE LTD |
| 资助机构 | China ; Youth Innovation Promotion Association, CAS ; LingChuang Research Project of China National Nuclear Corporation ; CNNC Science Fund for Talented Young Scholars |
| 源URL |  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Chen, Shenghu; Rong, Lijian |
| 作者单位 | 1.Chinese Acad Sci, Inst Met Res, Key Lab Nucl Mat & Safety Assessment, Shenyang 110016, Peoples R China 2.Univ Sci & Technol China, Sch Mat Sci & Engn, Hefei 230026, Peoples R China |
| 推荐引用方式 GB/T 7714 | Xie, Ang,Chen, Shenghu,Chen, Sihan,et al. Austenite decomposition behavior adjacent to δ-ferrite in a Si-modified Fe-Cr-Ni austenitic stainless steel during thermal aging at 550 °C[J]. ACTA MATERIALIA,2024,272:19. |
| APA | Xie, Ang,Chen, Shenghu,Chen, Sihan,Jiang, Haichang,&Rong, Lijian.(2024).Austenite decomposition behavior adjacent to δ-ferrite in a Si-modified Fe-Cr-Ni austenitic stainless steel during thermal aging at 550 °C.ACTA MATERIALIA,272,19. |
| MLA | Xie, Ang,et al."Austenite decomposition behavior adjacent to δ-ferrite in a Si-modified Fe-Cr-Ni austenitic stainless steel during thermal aging at 550 °C".ACTA MATERIALIA 272(2024):19. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。