Microstructure and mechanical properties of transient liquid phase bonding Ti3SiC2 ceramic to SUS430 steel using an Al interlayer
文献类型：期刊论文
| 作者 | Zhao, Jing-xiang1; Li, Xi-chao1,2; Shi, Jing3; Cheng, Qiang3; Xu, Bin4,5; Sun, Ming-yue4,5; Zheng, Li-li1,2 |
| 刊名 | JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL
 |
| 出版日期 | 2024-06-25 |
| 页码 | 14 |
| 关键词 | Ti3SiC2 ceramic SUS430 ferritic stainless steel Transient liquid phase bonding technique Microstructure Mechanical property |
| ISSN号 | 1006-706X |
| DOI | 10.1007/s42243-024-01265-8 |
| 通讯作者 | Li, Xi-chao(lixichao@qdu.edu.cn) ; Zheng, Li-li(llzheng@qdu.edu.cn) |
| 英文摘要 | Ti3SiC2 ceramic and SUS430 ferritic stainless steel were welded by the transient liquid phase (TLP) diffusion bonding method using an Al interlayer at 850-1050 degrees C in vacuum. The evolution of phase and morphology at the interface and bonding strength were systematically investigated. The results show that Ti3SiC2 and SUS430 were well bonded at 900-950 degrees C. Three reaction zones were observed at the interface. At the joint interface area adjacent to alloy, the alloy completely reacted with liquid Al to form Al86Fe14. At Ti3SiC2/Al interface, Ti and Si diffused outward from Ti3SiC2 into the molten Al to form Fe3Al + Al5FeSi + TiAl3 zone. Adjacent to Ti3SiC2 matrix, Ti3Si(Al)C-2 + TiCx zone was formed by the loss of Si. The evolution mechanism of TLP-bonded joints was discussed based on the interface microstructure and product phases. In addition, the tensile strength of the joint increased with increasing bonding temperature. The corresponding maximum value of 59.7 MPa was obtained from SUS430/Al (10 mu m)/Ti3SiC2 joint prepared at 950 degrees C. |
| 资助项目 | National Natural Science Foundation of China[52001179] ; Natural Science Foundation of Shandong Province, China[ZR2020ME019] |
| WOS研究方向 | Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:001254184600001 |
| 出版者 | SPRINGER |
| 资助机构 | National Natural Science Foundation of China ; Natural Science Foundation of Shandong Province, China |
| 源URL |  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Li, Xi-chao; Zheng, Li-li |
| 作者单位 | 1.Qingdao Univ, Coll Mech & Elect Engn, Qingdao 266071, Shandong, Peoples R China 2.Qingdao Univ, Natl Engn Res Ctr Intelligent Elect Vehicle Power, Qingdao 266071, Shandong, Peoples R China 3.Ocean Univ China, Sch Mat Sci & Engn, Qingdao 266100, Shandong, Peoples R China 4.Chinese Acad Sci, Key Lab Nucl Mat & Safety Assessment, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China 5.Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, Shenyang 110016, Liaoning, Peoples R China |
| 推荐引用方式 GB/T 7714 | Zhao, Jing-xiang,Li, Xi-chao,Shi, Jing,et al. Microstructure and mechanical properties of transient liquid phase bonding Ti3SiC2 ceramic to SUS430 steel using an Al interlayer[J]. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL,2024:14. |
| APA | Zhao, Jing-xiang.,Li, Xi-chao.,Shi, Jing.,Cheng, Qiang.,Xu, Bin.,...&Zheng, Li-li.(2024).Microstructure and mechanical properties of transient liquid phase bonding Ti3SiC2 ceramic to SUS430 steel using an Al interlayer.JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL,14. |
| MLA | Zhao, Jing-xiang,et al."Microstructure and mechanical properties of transient liquid phase bonding Ti3SiC2 ceramic to SUS430 steel using an Al interlayer".JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2024):14. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。