A high-strength binary Mg-1.2Ce alloy with ultra-fine grains achieved by conventional one-step extrusion during 300-400 °C
文献类型：期刊论文
| 作者 | Zhao, Dongqing1; Zhang, Sha2; Cheng, Kaiming1,3; Yang, Fan1; Yu, Huan1,3; Liu, Hongtao1; Zhang, Xinfang1; Wang, Xitao1; Yang, Yuansheng4; Zhou, Jixue1,3 |
| 刊名 | JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
 |
| 出版日期 | 2024-05-01 |
| 卷号 | 30页码:7697-7708 |
| 关键词 | Mg-Ce alloy Particle-stimulated nucleation High-density dislocation Segregation |
| ISSN号 | 2238-7854 |
| DOI | 10.1016/j.jmrt.2024.05.121 |
| 通讯作者 | Zhao, Dongqing(zhaodq@sdas.org) ; Zhou, Jixue(zhoujx@sdas.org) |
| 英文摘要 | Ultra-fine grained magnesium alloys are usually prepared by severe deformation and medium-low temperature deformation. In this work, it has been found that the binary Mg-1.2Ce alloy with the uniform distributed Mg12Ce precipitates smaller than 3 mu m is a good candidate to obtain ultra-fine grains by conventional one-step extrusion at high temperatures. All the three Mg-1.2Ce samples extruded at 300 degrees C, 350 degrees C and 400 degrees C show a bimodal microstructure with high-density dislocations, whose average grain sizes are 1.19 +/- 0.92 mu m, 1.32 +/- 1.30 mu m, and 1.44 +/- 1.33 mu m, respectively. A linear relation of ln(d) = -0.05ln(Z)+1.27 was determined relating the average grain size (d) to the Zener-Hollomon parameter (Z). The alloy extruded at 300 degrees C exhibits an exceptionally high ultimate tensile strength (UTS) of 412.3 +/- 5.3 MPa and yield strength (TYS) of 387.6 +/- 3.2 MPa, but a low elongation after fracture (El) of 4.9 +/- 0.8 %. With the extrusion temperature increasing, the tensile strength gradually decreases. For the 1.2E-400 sample, the TYS and the UTS drop to 347.2 +/- 2.1 MPa and 349.4 +/- 2.8 MPa, while the El increases to a more acceptable value of 12.6 +/- 1.4 %. The microstructure analysis reveals that Ce atoms segregate along grain boundaries and dislocations in the Mg-1.2Ce alloy, which can limit the gliding of GBs or the slipping and climbing of dislocations. Additionally, dislocations can be pinned by Mg12Ce precipitates, thereby also restricting dislocation and grain boundary mobility. Consequently, the dynamic recrystallization (DRX) process is delayed, leading to the formation of a bimodal microstructure. |
| 资助项目 | Shandong Provincial Natural Science Foundation[ZR2021ME250] ; National Natural Science Foundation of China[52004135] ; Youth Innovation and Technology Support Program of Shandong Provincial Colleges and Universities[2020KJA002] ; Key R & D Program of Shandong Province, China[2021SFGC1001] |
| WOS研究方向 | Materials Science ; Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:001266410400001 |
| 出版者 | ELSEVIER |
| 资助机构 | Shandong Provincial Natural Science Foundation ; National Natural Science Foundation of China ; Youth Innovation and Technology Support Program of Shandong Provincial Colleges and Universities ; Key R & D Program of Shandong Province, China |
| 源URL |  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Zhao, Dongqing; Zhou, Jixue |
| 作者单位 | 1.Qilu Univ Technol, Adv Mat Inst, Shandong Acad Sci, Shandong Prov Key Lab High Strength Lightweight Me, Jinan 250014, Peoples R China 2.Changsha Univ, Coll Mech & Elect Engn, Changsha 410022, Peoples R China 3.Adv Mat Inst, Engn Res Ctr Lightweight Automobiles Magnesium All, Jinan 250014, Peoples R China 4.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China |
| 推荐引用方式 GB/T 7714 | Zhao, Dongqing,Zhang, Sha,Cheng, Kaiming,et al. A high-strength binary Mg-1.2Ce alloy with ultra-fine grains achieved by conventional one-step extrusion during 300-400 °C[J]. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T,2024,30:7697-7708. |
| APA | Zhao, Dongqing.,Zhang, Sha.,Cheng, Kaiming.,Yang, Fan.,Yu, Huan.,...&Zhou, Jixue.(2024).A high-strength binary Mg-1.2Ce alloy with ultra-fine grains achieved by conventional one-step extrusion during 300-400 °C.JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T,30,7697-7708. |
| MLA | Zhao, Dongqing,et al."A high-strength binary Mg-1.2Ce alloy with ultra-fine grains achieved by conventional one-step extrusion during 300-400 °C".JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T 30(2024):7697-7708. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。