中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
Tensile properties and deformation mechanisms of a fourth-generation nickel-based single crystal superalloy at intermediate temperatures

文献类型:期刊论文

作者Huo, Shida1,2; Wang, Xinguang1; Tan, Zihao1; Li, Yongmei1; Tao, Yan1; Zhang, Chunhua2; Zhang, Song2; Tao, Xipeng1; Du, Yunling3; Yang, Yanhong1
刊名INTERMETALLICS
出版日期2024-12-01
卷号175页码:10
关键词Single crystal superalloy Tensile property Deformation mechanism Fracture characteristic Dislocations
ISSN号0966-9795
DOI10.1016/j.intermet.2024.108471
通讯作者Wang, Xinguang(xgwang11b@imr.ac.cn) ; Zhang, Chunhua(zhangch5858@126.com)
英文摘要This paper comprehensively explores the causes of intermediate-temperature brittleness of a fourth-generation Nickel-based single-crystal superalloy through a systematic study of tensile properties and deformation mechanisms at intermediate-temperatures. The research was performed at temperature of 700 degrees C, 800 degrees C, 850 degrees C and 900 degrees C. The experimental alloy demonstrated the highest yield strength of 914 MPa and worst plasticity at 800 degrees C. It was found that pure-shearing fracture occurred at 700 degrees C and 800 degrees C, while the fracture characteristics of shear fracture and ductile fracture were found at 850 degrees C and 900 degrees C. Then, the slip bands extended in the same direction at 700 degrees C and 800 degrees C. The phenomenon was different at 850 degrees C and 900 degrees C. These deformation traces extended in the different directions. At 700 degrees C and 800 degrees C, the partial dislocation with Burgers Vector of a/3 <112> shearing into the gamma ' phases was the predominate deformation mechanism, while both the partial dislocation with Burgers Vector of a/3 <112> and the super-dislocation with Burgers Vector of a <110> and a <010> shearing into the gamma ' phases were present at 850 degrees C and 900 degrees C. Nevertheless, the mechanism of the superdislocation with Burgers Vector of a <110> and a <010> shearing gamma ' phases pervaded in the alloy at 900 degrees C. In general, it was concluded that the alloy underwent intermediate-temperature brittleness at 800 degrees C in terms of the changes of fracture features, slip bands and dislocation configurations. The results of this study provided an experimental reference and guidance for improving the safe serviceability of the fourth-generation single crystal superalloy.
资助项目National Key R & D Program of China[2021YFB3700600] ; Middle-aged and Youth Tal-ents in Scientific and Technological Innovation Project of Shenyang[RC220440] ; Natural Science Fund Project of Liaoning Province[2023-BS-186]
WOS研究方向Chemistry ; Materials Science ; Metallurgy & Metallurgical Engineering
语种英语
WOS记录号WOS:001309803600001
出版者ELSEVIER SCI LTD
资助机构National Key R & D Program of China ; Middle-aged and Youth Tal-ents in Scientific and Technological Innovation Project of Shenyang ; Natural Science Fund Project of Liaoning Province
源URL  
专题金属研究所_中国科学院金属研究所
通讯作者Wang, Xinguang; Zhang, Chunhua
作者单位1.Chinese Acad Sci, Inst Met Res, Shi Changxu Innovat Ctr Adv Mat, Shenyang 110016, Peoples R China
2.Shenyang Univ Technol, Sch Mat Sci & Engn, Shenyang 110870, Liaoning, Peoples R China
3.Liaoning Petrochem Univ, Sch Mech Engn, Fushun 113001, Liaoning, Peoples R China
推荐引用方式
GB/T 7714
Huo, Shida,Wang, Xinguang,Tan, Zihao,et al. Tensile properties and deformation mechanisms of a fourth-generation nickel-based single crystal superalloy at intermediate temperatures[J]. INTERMETALLICS,2024,175:10.
APA Huo, Shida.,Wang, Xinguang.,Tan, Zihao.,Li, Yongmei.,Tao, Yan.,...&Sun, Xiaofeng.(2024).Tensile properties and deformation mechanisms of a fourth-generation nickel-based single crystal superalloy at intermediate temperatures.INTERMETALLICS,175,10.
MLA Huo, Shida,et al."Tensile properties and deformation mechanisms of a fourth-generation nickel-based single crystal superalloy at intermediate temperatures".INTERMETALLICS 175(2024):10.

入库方式: OAI收割

来源:金属研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。