In situ anchoring of FeNi nanoparticles into three-dimensional nitrogen-doped carbon framework as a self-supporting electrode for high-performance lithium storage
文献类型：期刊论文
| 作者 | Li, Xiaoqiang1,3; Li, Chunjin2; Guan, Guangguang4; Zhang, Xueke1; Xiang, Jun1 |
| 刊名 | VACUUM
 |
| 出版日期 | 2024-12-01 |
| 卷号 | 230页码:10 |
| 关键词 | Flexible electrodes Lithium-ion batteries Carbon fiber Lithium storage performance |
| ISSN号 | 0042-207X |
| DOI | 10.1016/j.vacuum.2024.113697 |
| 通讯作者 | Li, Chunjin(lcj349@126.com) ; Xiang, Jun(jxiang@just.edu.cn) |
| 英文摘要 | Constructing free-standing electrodes with superior lithium storage capacity and good mechanical performance are fascinating for next-generation lithium-ion batteries (LIBs). Nevertheless, their practical application is hindered by complicated synthesis procedures and high cost. Herein, a highly stable, self-supporting and flexible electrode material for LIBs was constructed by encapsulating spherical FeNi nanoparticles into one-dimensional N-doped carbon fiber film (FeNi/N- CFM) using the electrospinning technique and subsequent heat treatment. The FeNi/N-CFM can be directly used as anode materials for LIBs without conductive additive, current collector and binder. The synergistic effect of uniformly dispersed small FeNi nanoparticles and three-dimensional (3D) conductive network constructed by CF framework effectively improves the utilization rate of active materials, enhances the transport of both electrons and lithium ions, facilitates the electrolyte penetration, and promotes the lithium-ion storage kinetics and stability, thus leading to a greatly enhanced electrochemical performance. Benefiting from the unique architectural feature and flexibility, the FeNi/N-CFM composites employed as binderfree electrodes for LIBs exhibit good lithium storage performance (an initial discharge capacity of 1031.5 mA h g(-1) and a reversible capacity of 481.3 mA h g(-1) at 100 mA g(-1) after 100 cycles), rate capacity (305.1 mA h g(-1) at 1000 mA g(-1)) and outstanding reversibility (coulombic efficiency of around 100 % after 100 cycles). Furthermore, this work also provides a facile and effective pathway to design and fabricate free-standing electrodes. |
| 资助项目 | Postgraduate Research & Practice Innovation Program of Jiangsu Province of China[KYCX24-4101] |
| WOS研究方向 | Materials Science ; Physics |
| 语种 | 英语 |
| WOS记录号 | WOS:001331084900001 |
| 出版者 | PERGAMON-ELSEVIER SCIENCE LTD |
| 资助机构 | Postgraduate Research & Practice Innovation Program of Jiangsu Province of China |
| 源URL |  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Li, Chunjin; Xiang, Jun |
| 作者单位 | 1.Jiangsu Univ Sci & Technol, Sch Sci, Zhenjiang 212100, Peoples R China 2.Jiangsu Univ Sci & Technol, Sch Mech Engn, Zhenjiang 212100, Peoples R China 3.Beijing Univ Technol, Inst Mat Sci & Engn, Beijing 100124, Peoples R China 4.Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, Shenyang 110016, Peoples R China |
| 推荐引用方式 GB/T 7714 | Li, Xiaoqiang,Li, Chunjin,Guan, Guangguang,et al. In situ anchoring of FeNi nanoparticles into three-dimensional nitrogen-doped carbon framework as a self-supporting electrode for high-performance lithium storage[J]. VACUUM,2024,230:10. |
| APA | Li, Xiaoqiang,Li, Chunjin,Guan, Guangguang,Zhang, Xueke,&Xiang, Jun.(2024).In situ anchoring of FeNi nanoparticles into three-dimensional nitrogen-doped carbon framework as a self-supporting electrode for high-performance lithium storage.VACUUM,230,10. |
| MLA | Li, Xiaoqiang,et al."In situ anchoring of FeNi nanoparticles into three-dimensional nitrogen-doped carbon framework as a self-supporting electrode for high-performance lithium storage".VACUUM 230(2024):10. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。