中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
Influence of solid solution time on microstructure and precipitation strengthening of novel maraging steels

文献类型:期刊论文

作者Xu, T. Z.1; Wang, T.1; Wang, M. S.2; Zhang, S.1; Zhang, C. H.1; Wu, C. L.1; Sun, X. Y.3; Chen, H. T.3; Chen, J.3
刊名MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
出版日期2025
卷号920页码:13
关键词Laser direct energy deposition Maraging steel Solution treatment Tensile strength Microhardness
ISSN号0921-5093
DOI10.1016/j.msea.2024.147535
通讯作者Zhang, S.(songzhang_sy@163.com)
英文摘要Effective subsequent heat treatment is crucial for achieving the desired microstructure and excellent mechanical properties in laser-deposited high-performance maraging steel. In this paper, we systematically investigate the synergistic relationship and tuning mechanism of different solution treatment times on the microstructureproperty synergy of new maraging steels fabricated using laser direct energy deposition (LDED). To determine the optimal heat treatment process, solution treatment was conducted at 840 degrees C for varying durations, followed by aging at 530 degrees C for 2 h to induce precipitation strengthening. The results indicate that after 2 h of solution treatment, the alloy exhibits optimal ductility with an elongation of 7.90 % +/- 0.15 %, attributed to the refinement of the martensitic matrix and precipitated phases, along with the formation of a small amount of residual austenite. When the solution treatment time is extended to 4 h, the alloy achieves its highest tensile strength, reaching 1958 +/- 24 MPa. However, the elongation decreases to 7.31 % +/- 0.12 % due to the coarsening of the martensite and secondary phase particles. After 6 h of solution treatment, significant coarsening and aggregation of the martensite and Fe2Mo intermetallic compounds markedly reduce the hardness, strength, and toughness of the alloy. By adjusting the solution treatment time, the size, morphology, and distribution of the martensitic matrix, Fe2Mo, and nanoscale precipitated phases play a critical role in the strengthening and fracture processes. Therefore, optimizing the precipitation behavior of the martensitic matrix and Fe2Mo intermetallic compounds through rational solution heat treatment is key to enhancing the mechanical properties of laser-deposited new maraging steels.
资助项目National Key Research and Development Program of China[2023YFB4606605] ; General Project of Guangxi Natural Science Foundation[2023GXNSFAA026421] ; Shenyang Science and Technology[22-101-0-16]
WOS研究方向Science & Technology - Other Topics ; Materials Science ; Metallurgy & Metallurgical Engineering
语种英语
WOS记录号WOS:001360419400001
出版者ELSEVIER SCIENCE SA
资助机构National Key Research and Development Program of China ; General Project of Guangxi Natural Science Foundation ; Shenyang Science and Technology
源URL  
专题金属研究所_中国科学院金属研究所
通讯作者Zhang, S.
作者单位1.Shenyang Univ Technol, Sch Mat Sci & Engn, Shenyang 110870, Liaoning, Peoples R China
2.Chinese Acad Sci, Inst Met Res, Shangyang, Peoples R China
3.Shenyang Dalu Laser Technol Co Ltd, Shenyang 110136, Liaoning, Peoples R China
推荐引用方式
GB/T 7714
Xu, T. Z.,Wang, T.,Wang, M. S.,et al. Influence of solid solution time on microstructure and precipitation strengthening of novel maraging steels[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2025,920:13.
APA Xu, T. Z..,Wang, T..,Wang, M. S..,Zhang, S..,Zhang, C. H..,...&Chen, J..(2025).Influence of solid solution time on microstructure and precipitation strengthening of novel maraging steels.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,920,13.
MLA Xu, T. Z.,et al."Influence of solid solution time on microstructure and precipitation strengthening of novel maraging steels".MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 920(2025):13.

入库方式: OAI收割

来源:金属研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。