Additive manufacturing of a new titanium alloy with tunable microstructure and isotropic properties
文献类型：期刊论文
| 作者 | Chang, Jiaqiang1,3; Ma, Yingjie2; Huang, Sensen2; Qi, Min2; Zhai, Zirong1; Wu, Yingna1; Yang, Rui1,2; Zhang, Zhenbo1 |
| 刊名 | ADDITIVE MANUFACTURING
 |
| 出版日期 | 2024-09-05 |
| 卷号 | 95页码:16 |
| 关键词 | Titanium alloy Additive manufacturing Texture Equiaxed Isotropic property |
| ISSN号 | 2214-8604 |
| DOI | 10.1016/j.addma.2024.104546 |
| 通讯作者 | Ma, Yingjie(yjma@imr.ac.cn) ; Zhang, Zhenbo(zhangzhb1@shanghaitech.edu.cn) |
| 英文摘要 | Conventional titanium alloys have a high propensity in developing columnar grains with strong textures during additive manufacturing (AM), which causes pronounced anisotropy in mechanical properties and hampers their practical applications. In this study, a new metastable (3 titanium alloy with high Fe addition (Ti-3Al-6Fe-6V-2Zr, wt%) was designed for AM, and the strategies and underlying mechanisms to eliminating the structural heterogeneity including grain morphology, Fe element segregation and phase constituent distribution were elaborately investigated. It was demonstrated that the alloy has an outstanding intrinsic capability of forming equiaxed grains during direct energy deposition (DED) due to the positive effect of Fe on constitutional supercooling. The final microstructure of bulk sample was determined by the directly deposited microstructure and subsequent microstructure coarsening caused by cyclic heating, and homogeneously equiaxed microstructure without texture could be achieved when the heat-affected zones can fully cover the formerly deposited layer. Despite of very high level of Fe addition, both microscale and macroscale Fe segregation were completely suppressed during DED, by taking the advantages of fast solidification rate and tailoring the heating effect between the adjacent layers. Moreover, the problem related to the heterogeneity in alpha phase distribution along the building direction was solved by mitigating the heat accumulation during DED. On the basis of these understandings, homogeneously equiaxed Ti3662 alloy with isotropic mechanical properties of high strength (similar to 1200 MPa) and decent ductility (similar to 10 %) was finally fabricated by DED, which stands a good chance for practical application. This study demonstrates that the special metallurgical process during AM largely expands the design space of titanium alloys on the aspects of composition and microstructure, which can be utilized to fabricate titanium alloys with desirable microstructure and excellent properties. |
| 资助项目 | National Key R & D Program of China[2021YFC2801802] ; ShanghaiTech University Startup Fund ; Centre for High resolution Electron Microscopy (ChEM) , SPST, ShanghaiTech University[EM02161943] |
| WOS研究方向 | Engineering ; Materials Science |
| 语种 | 英语 |
| WOS记录号 | WOS:001358166500001 |
| 出版者 | ELSEVIER |
| 资助机构 | National Key R & D Program of China ; ShanghaiTech University Startup Fund ; Centre for High resolution Electron Microscopy (ChEM) , SPST, ShanghaiTech University |
| 源URL |  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Ma, Yingjie; Zhang, Zhenbo |
| 作者单位 | 1.ShanghaiTech Univ, Ctr Adapt Syst Engn, Shanghai 201210, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China 3.ShanghaiTech Univ, Sch Phys Sci & Technol, Shanghai 201210, Peoples R China |
| 推荐引用方式 GB/T 7714 | Chang, Jiaqiang,Ma, Yingjie,Huang, Sensen,et al. Additive manufacturing of a new titanium alloy with tunable microstructure and isotropic properties[J]. ADDITIVE MANUFACTURING,2024,95:16. |
| APA | Chang, Jiaqiang.,Ma, Yingjie.,Huang, Sensen.,Qi, Min.,Zhai, Zirong.,...&Zhang, Zhenbo.(2024).Additive manufacturing of a new titanium alloy with tunable microstructure and isotropic properties.ADDITIVE MANUFACTURING,95,16. |
| MLA | Chang, Jiaqiang,et al."Additive manufacturing of a new titanium alloy with tunable microstructure and isotropic properties".ADDITIVE MANUFACTURING 95(2024):16. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。