Fatigue strength optimization of high-strength steels by precisely controlling microstructure and inclusions
文献类型：期刊论文
| 作者 | Xu, Zikuan1; Wang, Peng1,2; Zhang, Peng1,2; Wang, Bin1; Liu, Yang1; Luan, Yikun1,2; Wang, Pei1,2; Li, Dianzhong1,2; Zhang, Zhefeng1,2 |
| 刊名 | JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
 |
| 出版日期 | 2025-09-20 |
| 卷号 | 230页码:165-176 |
| 关键词 | Bearing steel Fatigue strength Inclusion Rare earth element Heat treatment |
| ISSN号 | 1005-0302 |
| DOI | 10.1016/j.jmst.2025.01.018 |
| 通讯作者 | Zhang, Peng(pengzhang@imr.ac.cn) ; Zhang, Zhefeng(zhfzhang@imr.ac.cn) |
| 英文摘要 | With the increasing demand for high-performance metallic materials, the improvement of fatigue strength (FS) has become a crucial issue. This study focuses on the AISI 52100 steel, a material with leading fatigue performance and low-cost raw material, aiming to further improve its FS. It is found that the fatigue damage mechanism of 52100 steels with different tensile strengths has undergone significant changes, and the inclusions, mainly nitride and oxide, are key factors limiting the further improvement of FS. Therefore, the size reduction and modification of inclusions were attempted through the rare earth addition and strict control of harmful elements. Combining targeted microstructure adjustment, the FS of the 52100 steel has been further enhanced to similar to 1.6 GPa, exceeding that of other metallic materials (performed in uniaxial tension with a stress ratio of R = 0.1), and thus establishing it as a standout for its exceptional performance-to-cost ratio. By clarifying the influences of different types of inclusions on fatigue performance and establishing the correlation between micro-hardness (or strength) and FS, an optimization strategy for FS improvement of the 52100 steel was proposed. The FS has been improved by approximately 187 MPa at most by implementing this strategy. These achievements provide feasible technical approaches and theoretical foundations for the anti-fatigue design of metallic materials. (c) 2025 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology. |
| 资助项目 | National Key Re-search and Development Program of China[2022YFB3705200] ; National Natural Science Foundation of China (NSFC)[52321001] ; National Natural Science Foundation of China (NSFC)[52130002] ; National Natural Science Foundation of China (NSFC)[52371123] ; IMR Innovation Fund[2024-PY07] |
| WOS研究方向 | Materials Science ; Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:001443694000001 |
| 出版者 | ELSEVIER |
| 资助机构 | National Key Re-search and Development Program of China ; National Natural Science Foundation of China (NSFC) ; IMR Innovation Fund |
| 源URL |  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Zhang, Peng; Zhang, Zhefeng |
| 作者单位 | 1.Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, Shenyang 110016, Peoples R China 2.Univ Sci & Technol China, Sch Mat Sci & Engn, Shenyang 110016, Peoples R China |
| 推荐引用方式 GB/T 7714 | Xu, Zikuan,Wang, Peng,Zhang, Peng,et al. Fatigue strength optimization of high-strength steels by precisely controlling microstructure and inclusions[J]. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,2025,230:165-176. |
| APA | Xu, Zikuan.,Wang, Peng.,Zhang, Peng.,Wang, Bin.,Liu, Yang.,...&Zhang, Zhefeng.(2025).Fatigue strength optimization of high-strength steels by precisely controlling microstructure and inclusions.JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,230,165-176. |
| MLA | Xu, Zikuan,et al."Fatigue strength optimization of high-strength steels by precisely controlling microstructure and inclusions".JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY 230(2025):165-176. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。