Microstructure evolution and mechanical behavior of a heat-treated Ni-based superalloy AMSC-DB fabricated by laser direct energy deposition
文献类型：期刊论文
| 作者 | Yu, Hao1; Hu, Yanzhen1; Chen, Shaofeng2; Liang, Jingjing2; Li, Jinguo2; San-Martin, David3; Xu, Wei1 |
| 刊名 | JOURNAL OF ALLOYS AND COMPOUNDS
 |
| 出版日期 | 2025-04-05 |
| 卷号 | 1021页码:14 |
| 关键词 | Additive manufacturing Ni superalloys Microstructure Deformation mechanism |
| ISSN号 | 0925-8388 |
| DOI | 10.1016/j.jallcom.2025.179382 |
| 通讯作者 | Xu, Wei(xuwei@ral.neu.edu.cn) |
| 英文摘要 | The microstructure and mechanical behavior of a printable AMSC-DB superalloy fabricated by laser direct energy deposition (LDED) have been systematically investigated in this work. The microstructural evolution of alloy samples was characterized in their as-printed (AP), direct-aged (DA) and solutioned and aged (SA) states, with the tensile tests conducted at both ambient temperature and 900 degrees C. The gamma' precipitates in AP condition are small and round in shape, whereas in the DA condition they show a significant bimodal particle size distribution. In contrast, in the SA condition the gamma' particles possess the well-assembled uniform cubic shape. The carbides in the AP and the DA conditions display similar spatial skeleton structure; however, in the SA condition the carbides undergo partial dissolution turning into a structure of isolated particles. The tensile test results at ambient temperature show that the AP condition possess the highest UTS of around 1237 MPa, superior to the DA and SA conditions. Meanwhile, best ductility can be obtained in SA condition, with the total elongation reaching 22.1 %. The fracture analysis of the samples in all conditions after tensile testing confirm that ductile fracture is the dominant failure mode. The dislocation pairs shearing gamma' particles are consistently detected as the main deformation mechanism, while stacking faults are exclusively observed in small-size gamma' phases in AP and DA conditions. For the mechanical properties at 900 degrees C, samples treated under the SA condition show the highest UTS of 585 MPa with the lowest elongation of 7.7 %, while the AP condition presents the highest ductility with the lowest strength. The fracture surfaces of samples in the AP, DA and SA conditions present semi-brittle features at 900 degrees C test. Well-aligned gamma' particles in SA condition more effectively hinder the dislocation gliding and climbing, facilitating the localized dislocation accumulation. The present work provides insights into the microstructures and mechanical responses obtained via different post-printing processing strategies in Ni-based superalloys fabricated by additive manufacturing. |
| 资助项目 | National Key Research and Developement Program[2021YFB3702502] ; Na-tional Natural Science Foundation of China[52204383] |
| WOS研究方向 | Chemistry ; Materials Science ; Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:001443824800001 |
| 出版者 | ELSEVIER SCIENCE SA |
| 资助机构 | National Key Research and Developement Program ; Na-tional Natural Science Foundation of China |
| 源URL |  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Xu, Wei |
| 作者单位 | 1.Northeastern Univ, State Key Lab Rolling & Automat, Shenyang 110819, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Shi Changxu Innovat Ctr Adv Mat, Superalloys Div, Shenyang 110016, Peoples R China 3.Natl Ctr Met Res CENIM CSIC, Dept Phys Met, MATERALIA Res Grp, Avda Gregorio del Amo, Madrid 28040, Spain |
| 推荐引用方式 GB/T 7714 | Yu, Hao,Hu, Yanzhen,Chen, Shaofeng,et al. Microstructure evolution and mechanical behavior of a heat-treated Ni-based superalloy AMSC-DB fabricated by laser direct energy deposition[J]. JOURNAL OF ALLOYS AND COMPOUNDS,2025,1021:14. |
| APA | Yu, Hao.,Hu, Yanzhen.,Chen, Shaofeng.,Liang, Jingjing.,Li, Jinguo.,...&Xu, Wei.(2025).Microstructure evolution and mechanical behavior of a heat-treated Ni-based superalloy AMSC-DB fabricated by laser direct energy deposition.JOURNAL OF ALLOYS AND COMPOUNDS,1021,14. |
| MLA | Yu, Hao,et al."Microstructure evolution and mechanical behavior of a heat-treated Ni-based superalloy AMSC-DB fabricated by laser direct energy deposition".JOURNAL OF ALLOYS AND COMPOUNDS 1021(2025):14. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。