Pressureless sintering of nickel-alumina composite ceramics
文献类型:会议论文
作者 | Chen, Y. F.![]() ![]() ![]() |
出版日期 | 2002 |
会议名称 | 2nd China International Conference on High-Performance Ceramics (CICC-2) |
会议日期 | NOV 11-15, 2001 |
会议地点 | KUNMING, PEOPLES R CHINA |
关键词 | Ni/Al2O3 composite surface coating gelcasting pressureless sintering |
页码 | 321-324 |
中文摘要 | Ni/Al2O3 composite ceramics with a relative density of 97% were obtained after pressureless sintering the green bodies at 1480degreesC for 3h with the protection of graphite bed and TiO2 as sintering aid. In the processing of composites, Ni particles was first surface-coated with a layer of alumina to form composite particles, then gelcasting process was used to prepare the green body. The phase evolution during the sintering was identified by XRD. The densification process and physical properties of the composites were characterized using density, Vickers hardness, fracture toughness measurement and SEM observation. |
收录类别 | CPCI |
会议网址 | |
会议录 | KEY ENGINEERING MATERIALS
![]() |
会议录出版者 | Trans Tech Publications Ltd |
语种 | 英语 |
源URL | [http://ir.ipe.ac.cn/handle/122111/5676] ![]() |
专题 | 过程工程研究所_多相复杂系统国家重点实验室 |
推荐引用方式 GB/T 7714 |
Chen, Y. F.,Chen, Y. F.,Chen, Y. F.. Pressureless sintering of nickel-alumina composite ceramics[C]. 见:2nd China International Conference on High-Performance Ceramics (CICC-2). KUNMING, PEOPLES R CHINA. NOV 11-15, 2001. |
入库方式: OAI收割
来源:过程工程研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。