The tribological performance of DLC-based coating under the solid-liquid lubrication system with sand-dust particles
文献类型：期刊论文
| 作者 | Qi JW(亓健伟)1,2; Wang LP(王立平)1 ; Yan FY(阎逢元)1; Xue QJ(薛群基)1
|
| 刊名 | Wear
 |
| 出版日期 | 2013 |
| 卷号 | 297期号:1-2页码:972-985 |
| 关键词 | Diamond-like carbon Solid-liquid lubrication Sand-dust Stribeck curve Three-body abrasion |
| ISSN号 | 0043-1648 |
| 通讯作者 | 王立平 |
| 英文摘要 | Combination of solid and liquid lubricants to meet emission or environmental requirements of future tribological systems while providing the levels of desired friction and wear performance have received considerable research attention in the near term. The aim of the present work was to investigate the tribological behavior of oil-lubricated (PAO, PFPE, SO, IL and MAC) DLC coated surfaces under the conditions without and with sand-dust particles. The effects of applied load, frequency, and sand-dust particles on the tribological performance of DLC coating were systemically studied. The analysis results showed that solid-liquid lubricating coatings including SO and IL exhibited excellent anti-friction (～0.026) but relative poor wear-resistance performances under the conditions without and with sand-dust environments. But for PFPE and PAO, they demonstrated the worst tribological behaviors with high friction coefficient and wear rates. The added sand-dust particles lead to the wear rates to the one order of magnitude large than that without sand-dust conditions for all the selected liquid lubricants. The viscosity, contact angle and work of adhesion played an important part in affecting the tribological performances. The lubrication regimes in Stribeck curve for the five kinds of liquid lubricants were affected obviously by the sand-dust particles in different way. The formed transfer films on the coating surface and pin have much influence on the tribological behavior and the transition between lubrication regimes. |
| 学科主题 | 材料科学与物理化学 |
| 收录类别 | SCI |
| 资助信息 | the National Basic Research Program of China (973 Program) (No.2011CB706603);the National Natural Science Foundation of China (No.11172300) |
| 语种 | 英语 |
| WOS记录号 | WOS:000315555100031 |
| 公开日期 | 2013-12-03 |
| 源URL | [http://210.77.64.217/handle/362003/4353]  |
| 专题 | 兰州化学物理研究所_固体润滑国家重点实验室 |
| 作者单位 | 1.Chinese Acad Sci, State Key Lab Solid Lubricat, Lanzhou Inst Chem Phys, Lanzhou 730000, Peoples R China 2.China Univ Min & Technol, Inst Tribol & Reliabil, Xuzhou 221116, Jiangsu, Peoples R China |
| 推荐引用方式 GB/T 7714 | Qi JW,Wang LP,Yan FY,et al. The tribological performance of DLC-based coating under the solid-liquid lubrication system with sand-dust particles[J]. Wear,2013,297(1-2):972-985. |
| APA | Qi JW,Wang LP,Yan FY,&Xue QJ.(2013).The tribological performance of DLC-based coating under the solid-liquid lubrication system with sand-dust particles.Wear,297(1-2),972-985. |
| MLA | Qi JW,et al."The tribological performance of DLC-based coating under the solid-liquid lubrication system with sand-dust particles".Wear 297.1-2(2013):972-985. |
入库方式： OAI收割
来源：兰州化学物理研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。