Structure and magnetism of SmCo5 nanoflakes prepared by surfactant-assisted ball milling with different ball sizes
文献类型：期刊论文
| 作者 | Zhang J(张健) ; JunwuNie a,b, XianghuaHan a,b, JuanDu a,b, WeixingXia a,b, JianZhang a,b,n, ZhaohuiGuo c, Aru Yan a,b, WeiLi c, J.PingLiu a,b,d |
| 刊名 | J. Magn. Magn. Mater
 |
| 出版日期 | 2013-07-09 |
| 期号 | 347页码:116—123 |
| 通讯作者 | 张健 |
| 合作状况 | 李雨桐 |
| 中文摘要 | Anisotropic magnetic SmCo5nanoflakes have been fabricated by surfactant-assisted ball milling (SABM) using hardened steel balls of one of the following sizes: 4, 6.5, 9.5 and 12.7 mm in diameters. The magnetic properties of SmCo5particles prepared by SABM with different milling ball sizes in diameters were investigated systematically. It was showed that the nanoflakes milled by amount of small size balls had a higher coercivity and lower anisotropy, i.e., worse grain orientation although in a short milling time while the nanoflakes prepared with same weight of big balls tend to have a lower coercivity, better grain orientation. The coercivity mechanism of the nanoflake was studied and it was mainly dominated with the domain-wall pinning. The SEM analysis shows that the morphology of nanoflakes prepared with different ball sizes are almost the same when the balls to powder weight ratio isfixed. The different magnetic properties caused by different ball sizes are mainly due to the different microstructure changes, i.e, grain refinement andc-axis orientation, which are demonstrated by X-ray diffraction (XRD) analysis and transmission electron microscope (TEM). Based on the experiments above, a combined milling process was suggested and done to improve magnetic properties as your need. |
| 学科主题 | 纳米磁性材料研究室 |
| 原文出处 | SCI收录 |
| 公开日期 | 2013-12-16 |
| 源URL | [http://ir.nimte.ac.cn/handle/174433/9973]  |
| 专题 | 宁波材料技术与工程研究所_宁波所知识产出 |
| 推荐引用方式 GB/T 7714 | Zhang J,JunwuNie a,b, XianghuaHan a,b, JuanDu a,b, WeixingXia a,b, JianZhang a,b,n, ZhaohuiGuo c, Aru Yan a,b, WeiLi c, J.PingLiu a,b,d. Structure and magnetism of SmCo5 nanoflakes prepared by surfactant-assisted ball milling with different ball sizes[J]. J. Magn. Magn. Mater,2013(347):116—123. |
| APA | Zhang J,&JunwuNie a,b, XianghuaHan a,b, JuanDu a,b, WeixingXia a,b, JianZhang a,b,n, ZhaohuiGuo c, Aru Yan a,b, WeiLi c, J.PingLiu a,b,d.(2013).Structure and magnetism of SmCo5 nanoflakes prepared by surfactant-assisted ball milling with different ball sizes.J. Magn. Magn. Mater(347),116—123. |
| MLA | Zhang J,et al."Structure and magnetism of SmCo5 nanoflakes prepared by surfactant-assisted ball milling with different ball sizes".J. Magn. Magn. Mater .347(2013):116—123. |
入库方式： OAI收割
来源：宁波材料技术与工程研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。