中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
An approach to fabricate pure metallic Ni-Ni and metallic oxide Ni-NiO-Ni nanocontacts by repeatable microfabrication method

文献类型:期刊论文

作者Wei, HX ; Wang, TX ; Wang, H ; Han, XF ; Bari, MA ; Coey, JMD
刊名INTERNATIONAL JOURNAL OF NANOTECHNOLOGY
出版日期2007
卷号4期号:1-2页码:21
关键词IN-SITU MAGNETORESISTANCE BALLISTIC MAGNETORESISTANCE RESISTANCE CONTACT SENSORS
ISSN号1475-7435
通讯作者Han, XF: Chinese Acad Sci, Inst Phys, State Key Lab Magnetism, POB 603, Beijing 100080, Peoples R China.
中文摘要Metallic nickel films of thickness between 3 nm and 50 nm on SiO2/Si substrate were first deposited by magnetron sputtering system. T-shape nanocontacts for both pure metallic Ni-Ni and metallic oxide Ni-NiO-Ni were then patterned by electron-beam and ultra-violet lithography combined with focused ion beam milling method. The dimension of each of the nanocontacts along the horizontal direction with the thin film was systematically changed from 10 nm to 50 nm. Different oxidisation methods were used to investigate the influence of oxygen on transport properties upon the metallic oxide Ni-NiO-Ni nanocontacts. Magnetoresistances were observed lower than 1% at room temperature in both series. No evidence was found of large ballistic magnetoresistance based on such repeatable microfabrication methods.
收录类别SCI
语种英语
公开日期2013-09-17
源URL[http://ir.iphy.ac.cn/handle/311004/33626]  
专题物理研究所_物理所公开发表论文_物理所公开发表论文_期刊论文
推荐引用方式
GB/T 7714
Wei, HX,Wang, TX,Wang, H,et al. An approach to fabricate pure metallic Ni-Ni and metallic oxide Ni-NiO-Ni nanocontacts by repeatable microfabrication method[J]. INTERNATIONAL JOURNAL OF NANOTECHNOLOGY,2007,4(1-2):21.
APA Wei, HX,Wang, TX,Wang, H,Han, XF,Bari, MA,&Coey, JMD.(2007).An approach to fabricate pure metallic Ni-Ni and metallic oxide Ni-NiO-Ni nanocontacts by repeatable microfabrication method.INTERNATIONAL JOURNAL OF NANOTECHNOLOGY,4(1-2),21.
MLA Wei, HX,et al."An approach to fabricate pure metallic Ni-Ni and metallic oxide Ni-NiO-Ni nanocontacts by repeatable microfabrication method".INTERNATIONAL JOURNAL OF NANOTECHNOLOGY 4.1-2(2007):21.

入库方式: OAI收割

来源:物理研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。