Microstructure and dry sliding wear behavior of Fe2TiSi/gamma-Fe/Ti5Si3 composite coating fabricated by plasma transferred arc cladding process
文献类型：期刊论文
| 作者 | Liu, YF ; Liu, XB ; Xu, XY ; Yang, SZ |
| 刊名 | SURFACE & COATINGS TECHNOLOGY
 |
| 出版日期 | 2010 |
| 卷号 | 205期号:3页码:814 |
| 关键词 | TEMPERATURE STRUCTURAL SILICIDES WELD-SURFACING PROCESS WC-CO COATINGS INTERMETALLIC ALLOYS TITANIUM SILICIDE RESISTANCE OXIDATION SYSTEM TI5SI3 STEEL |
| ISSN号 | 0257-8972 |
| 通讯作者 | Liu, YF: Beijing Jiaotong Univ, Sch Mech Elect & Control Engn, Inst Mat Sci & Engn, Beijing 100044, Peoples R China. |
| 中文摘要 | Wear resistant Fe2TiSi reinforced composite coating with a microstructure consisting of fine Fe2TiSi primary dendrites uniformly distributed in the super fine gamma-Fe/Ti5Si3 eutectic matrix was in situ fabricated on a substrate of 0.20%C plain low carbon steel substrate by the plasma transferred arc (PTA) cladding process using Fe-Ti-Si-Cr powders blend as the precursor material. Microstructure of the coating was characterized by scanning electron microscope (SEM), X-ray diffraction (XRD) and X-ray energy dispersive spectrometer (EDS). Microhardness along the depth direction of the PTA clad Fe2TiSi/gamma-Fe/Ti5Si3 multi-phase composite coating was measured. Room temperature dry sliding wear resistance of the coating was tested. Results showed that the PTA clad Fe2TiSi/gamma-Fe/Ti5Si3 composite coating had high and almost uniform hardness distribution along the depth direction of the coating. Under dry sliding wear conditions at an ambient temperature, the PTA clad Fe2TiSi/gamma-Fe/Ti5Si3 composite coating exhibited excellent abrasive and adhesive wear resistance. (C) 2010 Elsevier B.V. All rights reserved. |
| 收录类别 | SCI |
| 资助信息 | National Natural Science Foundation of China [50071068]; National High Technology Research and Development Program of China [2003AA331190]; Jiangsu Provincial Natural Science Foundation [BK2009134]; Tribology Science Foundation of State Key Laboratory of Tribology [SKLTKF09B01] |
| 语种 | 英语 |
| 公开日期 | 2013-09-18 |
| 源URL | [http://ir.iphy.ac.cn/handle/311004/42062]  |
| 专题 | 物理研究所_物理所公开发表论文_物理所公开发表论文_期刊论文 |
| 推荐引用方式 GB/T 7714 | Liu, YF,Liu, XB,Xu, XY,et al. Microstructure and dry sliding wear behavior of Fe2TiSi/gamma-Fe/Ti5Si3 composite coating fabricated by plasma transferred arc cladding process[J]. SURFACE & COATINGS TECHNOLOGY,2010,205(3):814. |
| APA | Liu, YF,Liu, XB,Xu, XY,&Yang, SZ.(2010).Microstructure and dry sliding wear behavior of Fe2TiSi/gamma-Fe/Ti5Si3 composite coating fabricated by plasma transferred arc cladding process.SURFACE & COATINGS TECHNOLOGY,205(3),814. |
| MLA | Liu, YF,et al."Microstructure and dry sliding wear behavior of Fe2TiSi/gamma-Fe/Ti5Si3 composite coating fabricated by plasma transferred arc cladding process".SURFACE & COATINGS TECHNOLOGY 205.3(2010):814. |
入库方式： OAI收割
来源：物理研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。