Titanium carbonitride films on cemented carbide cutting tool prepared by pulsed high energy density plasma
文献类型：期刊论文
| 作者 | Feng, WR ; Liu, CZ ; Chen, GL ; Zhang, GL ; Gu, WC ; Niu, EW ; Yang, SZ |
| 刊名 | APPLIED SURFACE SCIENCE
 |
| 出版日期 | 2007 |
| 卷号 | 253期号:11页码:4923 |
| ISSN号 | 0169-4332 |
| 中文摘要 | Hard films prepared by pulsed high energy density plasma (PHEDP) are characterized by high film/substrate adhesive strength, and high wear resistance. Titanium carbonitride (TiCN) films were deposited onto YG11C (ISO G20) cemented carbide cutting tool substrates by PHEDP at room temperature. XRD, XPS, SEM, AES, etc. were adopted to analyze the phases (elements) composition, microstructure and the interface of the films, respectively. The results show that, the uniform dense films are composed of grains ranging from 70 to 90 nm. According to the AES result, there is a broad transition layer between the film and the substrate, due to the ion implantation effect of the PHEDP. The transition layer is favorable for the film/substrate adhesion. (c) 2006 Elsevier B.V. All rights reserved. |
| 收录类别 | SCI |
| 公开日期 | 2013-09-23 |
| 源URL | [http://ir.iphy.ac.cn/handle/311004/45944]  |
| 专题 | 物理研究所_物理所公开发表论文_物理所公开发表论文_期刊论文 |
| 推荐引用方式 GB/T 7714 | Feng, WR,Liu, CZ,Chen, GL,et al. Titanium carbonitride films on cemented carbide cutting tool prepared by pulsed high energy density plasma[J]. APPLIED SURFACE SCIENCE,2007,253(11):4923. |
| APA | Feng, WR.,Liu, CZ.,Chen, GL.,Zhang, GL.,Gu, WC.,...&Yang, SZ.(2007).Titanium carbonitride films on cemented carbide cutting tool prepared by pulsed high energy density plasma.APPLIED SURFACE SCIENCE,253(11),4923. |
| MLA | Feng, WR,et al."Titanium carbonitride films on cemented carbide cutting tool prepared by pulsed high energy density plasma".APPLIED SURFACE SCIENCE 253.11(2007):4923. |
入库方式： OAI收割
来源：物理研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。