Method of Stressed Lap Shape Control for Large Mirror Fabrication
文献类型:会议论文
作者 | Daxing Wang![]() ![]() ![]() ![]() |
出版日期 | 2006-07-06 |
会议日期 | 2006-5-24 |
会议地点 | Orlando, FL |
关键词 | Optical fabrication stressed lap linear inequalities aspheric |
卷号 | 6273 |
期号 | 6273 |
页码 | Vol.6273 0D-1-8 |
英文摘要 |
NIAOT has made a stressed lap polishing machine and finished aφ 910mm, F/2.0 paraboloid. In the process we found shape control strategy is an important technology for stressed lap polishing tool and this kind of content has not been discussed systematically before. So this paper mainly dedicates to the method of lap shape control. Firstly a mathematical model of stressed lap is introduced. Then three shape control methods are put forward one by one concerning aspects as shape accuracy and deformation hysteresis. The fundamental method is least square algorithm. On the base of it we put forward its reformation form: least square algorithm with damping factor. To get more satisfied performance a new algorithm using optimization under constrains of linear inequalities is proposed. Through theoretical analysis and computer simulation some comparisons are made among three methods. Finally we have done experiments
using stressed lap polishing machine in NIAOT and the results obtained substantiate the feasibility and efficiency of our method. |
会议主办者 | The International Society for Optical Engineering |
会议录 | Optomechanical Technologies for Astronomy
![]() |
会议录出版者 | SPIE |
学科主题 | 天文镜面(材料、加工、检测) |
源URL | [http://ir.niaot.ac.cn/handle/114a32/445] ![]() |
专题 | 会议论文 |
推荐引用方式 GB/T 7714 | Daxing Wang,Yi Zheng,Ying Li,et al. Method of Stressed Lap Shape Control for Large Mirror Fabrication[C]. 见:. Orlando, FL. 2006-5-24. |
入库方式: OAI收割
来源:南京天文光学技术研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。