A beveled working electrode coupled to a sandglass shape detection cell: A strategy to improve the sensitivity of electrochemiluminescence detection in microchip electrophoresis
文献类型：期刊论文
| 作者 | Pan, Jianbin ; Li, Xinchun ; Chen, Zuanguang ; Yang, Fan ; Wu, Xiaohang ; Li, Yinbao ; Sun, Duanping ; Yu, Yanyan |
| 刊名 | ELECTROCHIMICA ACTA
 |
| 出版日期 | 2013 |
| 卷号 | 90页码:CONCATENATE(Sheet1!I2,-Sheet1!J2) |
| ISSN号 | 0013-4686 |
| 英文摘要 | A beveled working electrode (WE) with a sandglass shape electrochemiluminescence (ECL) detection cell based on tris(2,2'-bipyridyl)ruthenium(II) (TBR) for microchip capillary electrophoresis (MCE) was described in this paper. The beveled WE was readily fabricated from a platinum (Pt) wire (0.3 mm diameter). The microchip comprised of three layers: top polydimethylsiloxane (PDMS) layer, middle glass plate, and bottom glass coverslip. The middle layer was a glass wafer on which the injection and separation channels were etched; meanwhile, an inverted funnel hole was made by a coniform drill, and a snot which was used to hold a guide tube aligning to the separation channel outlet was fabricated by a clubbed drill. The top layer was PDMS block containing four holes that connected injection channels and separation channel terminals, respectively. The two layers were bonded after their surfaces were processed by a plasma cleaner. The bottom layer was a coverslip (0.17 mm thick) which covered the inverted funnel hole in the middle layer with epoxy resin. The beveled WE was inserted into the guide tube and immobilized using melt adhesive. A Pt wire acted as a counter electrode (CE) was penetrated through the PDMS layer perpendicularly to the WE, with a 1.5-mm long portion left inside the detection cell. Proline was used to evaluate the developed MCE-ECL microdevice with the limit of detection down to 0.2 mu M (S/N = 3). The detection sensitivity was found to be improved remarkably, compared to the conventional disk electrode. (c) 2012 Elsevier Ltd. All rights reserved. |
| 收录类别 | SCI |
| 语种 | 英语 |
| WOS记录号 | WOS:000316037600013 |
| 公开日期 | 2014-06-13 |
| 源URL | [http://ir.sinap.ac.cn/handle/331007/13646]  |
| 专题 | 上海应用物理研究所_中科院上海应用物理研究所2011-2017年 |
| 推荐引用方式 GB/T 7714 | Pan, Jianbin,Li, Xinchun,Chen, Zuanguang,et al. A beveled working electrode coupled to a sandglass shape detection cell: A strategy to improve the sensitivity of electrochemiluminescence detection in microchip electrophoresis[J]. ELECTROCHIMICA ACTA,2013,90:CONCATENATE(Sheet1!I2,-Sheet1!J2). |
| APA | Pan, Jianbin.,Li, Xinchun.,Chen, Zuanguang.,Yang, Fan.,Wu, Xiaohang.,...&Yu, Yanyan.(2013).A beveled working electrode coupled to a sandglass shape detection cell: A strategy to improve the sensitivity of electrochemiluminescence detection in microchip electrophoresis.ELECTROCHIMICA ACTA,90,CONCATENATE(Sheet1!I2,-Sheet1!J2). |
| MLA | Pan, Jianbin,et al."A beveled working electrode coupled to a sandglass shape detection cell: A strategy to improve the sensitivity of electrochemiluminescence detection in microchip electrophoresis".ELECTROCHIMICA ACTA 90(2013):CONCATENATE(Sheet1!I2,-Sheet1!J2). |
入库方式： OAI收割
来源：上海应用物理研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。