Synthesis of hexagonal-prism-like ZrB2 by a sol-gel route
文献类型:期刊论文
作者 | Yang, Biyun1; Li, Junping2; Zhao, Bin1; Hu, Yongzhen1; Wang, Tingyu1; Sun, Dongfeng1; Li, Ruixing1; Yin, Shu3; Feng, Zhihai2; Tang, Qing4 |
刊名 | POWDER TECHNOLOGY
![]() |
出版日期 | 2014-04-01 |
卷号 | 256期号:1页码:522-528 |
关键词 | Synthesis Sol-gel Carbothermal reduction Crystal morphology ZrB2 |
ISSN号 | 0032-5910 |
其他题名 | Powder Technol. |
中文摘要 | One-dimensional (1D) materials can increase mechanical properties along the long axis of the reinforcement for the composites because of the transfer of stress across the reinforcement-matrix interfaces parallel with the load. In this study, 1D hexagonal-prism-like ZrB2 particles were synthesized by a sol-gel route using zirconium n-propoxide, boric acid, acetic acid, and fructose. Fructose acted as both a modifier and a carbon source for carbothermal reduction reaction. For comparison purposes, both nascent state gel and aged gel were used to clarify the aging-time-dependent mechanism for ZrB2 synthesis. As a result, a single phase ZrB2 could only be obtained from the aged gel with the optimal ratios (by mol.) of 1.2 and 5 for both fructose and acetic acid to zirconium n-propoxide, respectively, reduced at an optimal temperature of 1550 degrees C for 2 h. Additionally, it revealed a perfect hexagonal-prism-like morphology for the ZrB2 particles with a uniform size and shape distribution, and average particle size of ca. 0.8 mu m in diameter of excircle of the hexagonal cross-section. (C) 2014 Elsevier B.V. All rights reserved. |
英文摘要 | One-dimensional (1D) materials can increase mechanical properties along the long axis of the reinforcement for the composites because of the transfer of stress across the reinforcement-matrix interfaces parallel with the load. In this study, 1D hexagonal-prism-like ZrB2 particles were synthesized by a sol-gel route using zirconium n-propoxide, boric acid, acetic acid, and fructose. Fructose acted as both a modifier and a carbon source for carbothermal reduction reaction. For comparison purposes, both nascent state gel and aged gel were used to clarify the aging-time-dependent mechanism for ZrB2 synthesis. As a result, a single phase ZrB2 could only be obtained from the aged gel with the optimal ratios (by mol.) of 1.2 and 5 for both fructose and acetic acid to zirconium n-propoxide, respectively, reduced at an optimal temperature of 1550 degrees C for 2 h. Additionally, it revealed a perfect hexagonal-prism-like morphology for the ZrB2 particles with a uniform size and shape distribution, and average particle size of ca. 0.8 mu m in diameter of excircle of the hexagonal cross-section. (C) 2014 Elsevier B.V. All rights reserved. |
WOS标题词 | Science & Technology ; Technology |
类目[WOS] | Engineering, Chemical |
研究领域[WOS] | Engineering |
关键词[WOS] | NANOCARBON-DEPENDENT SYNTHESIS ; IN-SITU SYNTHESIS ; CARBON SOURCE ; ZIRCONIUM ; ZRO2 ; MICROSTRUCTURE ; NANOPARTICLES ; MORPHOLOGY ; REDUCTION ; COMPOSITE |
收录类别 | SCI |
原文出处 | |
语种 | 英语 |
WOS记录号 | WOS:000335097600062 |
公开日期 | 2014-08-28 |
版本 | 出版稿 |
源URL | [http://ir.ipe.ac.cn/handle/122111/11005] ![]() |
专题 | 过程工程研究所_研究所(批量导入) |
作者单位 | 1.Beihang Univ, Sch Mat Sci & Engn, Minist Educ, Key Lab Aerosp Mat & Performance, Beijing 100191, Peoples R China 2.Aerosp Res Inst Mat & Proc Technol, Beijing 100076, Peoples R China 3.Tohoku Univ, Inst Multidisciplinary Res Adv Mat, Aoba Ku, Sendai, Miyagi 9808577, Japan 4.Chinese Acad Sci, Inst Proc Engn, Beijing 100190, Peoples R China |
推荐引用方式 GB/T 7714 | Yang, Biyun,Li, Junping,Zhao, Bin,et al. Synthesis of hexagonal-prism-like ZrB2 by a sol-gel route[J]. POWDER TECHNOLOGY,2014,256(1):522-528. |
APA | Yang, Biyun.,Li, Junping.,Zhao, Bin.,Hu, Yongzhen.,Wang, Tingyu.,...&Sato, Tsugio.(2014).Synthesis of hexagonal-prism-like ZrB2 by a sol-gel route.POWDER TECHNOLOGY,256(1),522-528. |
MLA | Yang, Biyun,et al."Synthesis of hexagonal-prism-like ZrB2 by a sol-gel route".POWDER TECHNOLOGY 256.1(2014):522-528. |
入库方式: OAI收割
来源:过程工程研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。