Preparation and characterization of macroporous pumice-porcelain composite foams
文献类型：会议论文
| 作者 | Wu, Z. J.; Chen, Y. F. ; Yu, Y. T.
|
| 出版日期 | 2008 |
| 会议名称 | 5th China International Conference on High-Performance Ceramics (CICC-5) |
| 会议日期 | MAY 10-13, 2007 |
| 会议地点 | Changsha, PEOPLES R CHINA |
| 关键词 | macroporous foams open-cell pumice porcelain stone CERAMIC FOAMS MECHANICAL-PROPERTIES |
| 页码 | 1513-1515 |
| 中文摘要 | The open-cell macroporous ceramic foams can be used to air and water decontamination after loading catalyst. A new kind of ceramic foam was prepared using pumice, porcelain stone, quartz as main raw materials and polyurethane sponge as template. During the process, the polyurethane sponges were immersed in the powder slurry while submerged to fill all the pores, which makes it uniformly coating the sponge. Then the samples were dried at 80 degrees C, and then sintered at 1050 degrees C-1200 degrees C for 2h in air. The ceramic foams present high porosity from 75% to 90%, higher compassion strength from 10 MPa to 50MPa and lower volume density from 0.15g/cm(3) to 0.32g/cm(3). The SEM images revealed the open-cell structure in the product. |
| 收录类别 | ISTP |
| 会议网址 | |
| 会议录 | KEY ENGINEERING MATERIALS Volume: 368-372 Pages: 1513-1515 Part: 1-2
 |
| 会议录出版者 | Trans Tech Publications Ltd |
| 语种 | 英语 |
| 源URL | [http://ir.ipe.ac.cn/handle/122111/11253]  |
| 专题 | 过程工程研究所_研究所（批量导入） |
| 推荐引用方式 GB/T 7714 |
Wu, Z. J.,Chen, Y. F.,Yu, Y. T.. Preparation and characterization of macroporous pumice-porcelain composite foams[C]. 见:5th China International Conference on High-Performance Ceramics (CICC-5). Changsha, PEOPLES R CHINA. MAY 10-13, 2007. |
入库方式： OAI收割
来源：过程工程研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。