Simulation of heavy-oil thermal cracking process on the basis of carbon number-based component approach
文献类型：会议论文
| 作者 | Zhang, X. P.; Yan, L.; Yu, G. G.; Zhang, S. J.; Dai, W. B. |
| 出版日期 | 2005 |
| 会议名称 | 15th European Symposium on Computer Aided Process Engineering (ESCAPE-15) |
| 会议日期 | MAY 29-JUN 01, 2005 |
| 会议地点 | Barcelona, SPAIN |
| 关键词 | heavy oil thermal cracking reactor simulation carbon number-based component |
| 页码 | 469-474 |
| 中文摘要 | Simulation of heavy oil thermal cracking process is very important but few researches have been published now. In this paper, a simulation framework based on the carbon number-based approach(CNCA) has been established. A systematic division rule is put forward for dividing cracked products into 59 carbon number components. Then the cracking reaction network has been structured and the corresponding reaction rate equations have been obtained. The reaction rate constants were fitted with the experimental data. A plug fluid model is used to model the cracking reactor and the simulation procedure for heavy-oil thermal-cracking process has been developed. The calculated results are compared with the plant data. |
| 收录类别 | ISTP |
| 会议网址 | |
| 会议录出版者 | Elsevier Science Bv |
| 语种 | 英语 |
| 源URL | [http://ir.ipe.ac.cn/handle/122111/11306]  |
| 专题 | 过程工程研究所_研究所（批量导入） |
| 推荐引用方式 GB/T 7714 |
Zhang, X. P.,Yan, L.,Yu, G. G.,et al. Simulation of heavy-oil thermal cracking process on the basis of carbon number-based component approach[C]. 见:15th European Symposium on Computer Aided Process Engineering (ESCAPE-15). Barcelona, SPAIN. MAY 29-JUN 01, 2005. |
入库方式： OAI收割
来源：过程工程研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。