Study on Thickness Control and Quantitative of Converter Lining
文献类型：会议论文
| 作者 | Zhao, H. X. ; Yuan, Z. F. ; Wu, Y. ; Pan, Y. F. ; Li, S. Q. ; Qi, T. ; Wang, L. N. |
| 出版日期 | 2013 |
| 会议名称 | 2nd International Conference on Mechatronics and Control Engineering (ICMCE 2013) |
| 会议日期 | AUG 28-29, 2013 |
| 会议地点 | Dalian, PEOPLES R CHINA |
| 关键词 | converter lining thickness control thickness measuring by laser quantification BOF |
| 页码 | 2156-2163 |
| 中文摘要 | The thickness control of lining is vital to the normal operation of converter. Vulnerable parts of the furnace would be found and repaired timely by applying thickness measuring technique by laser. According to the measured results, the load part of the facet of the converter is the weakest location of the lining in the early campaign life, while the section of the trunnion is the weakest in the middle campaign life. When it comes to the later stage of campaign, the erosion of lining is severe. In line with the quantification of erosion parts, the lining thickness range can be divided into three parts, which are safety smelting area, stability control area and dangerous area. The economic life of the furnace life, which is 20 to 23 thousand heats, can be maintained as the thinnest lining is still above the stable range when the campaign reaches mid-late period. |
| 收录类别 | CPCI |
| 会议网址 | |
| 会议录 | ADVANCES IN MECHATRONICS AND CONTROL ENGINEERING II, PTS 1-3
 |
| 会议录出版者 | Trans Tech Publications Ltd |
| 语种 | 英语 |
| 源URL | [http://ir.ipe.ac.cn/handle/122111/11315]  |
| 专题 | 过程工程研究所_研究所（批量导入） |
| 推荐引用方式 GB/T 7714 |
Zhao, H. X.,Yuan, Z. F.,Wu, Y.,et al. Study on Thickness Control and Quantitative of Converter Lining[C]. 见:2nd International Conference on Mechatronics and Control Engineering (ICMCE 2013). Dalian, PEOPLES R CHINA. AUG 28-29, 2013. |
入库方式： OAI收割
来源：过程工程研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。