Simultaneous improvement of tensile strength and ductility in micro-duplex structure consisting of austenite and ferrite
文献类型：期刊论文
| 作者 | Chen L(陈柳) ; Yuan FP(袁福平); Jiang P(姜萍); Xie JJ(谢季佳); Wu XL(武晓雷); Wu XL(武晓雷)
|
| 刊名 | Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing
 |
| 出版日期 | 2014 |
| 卷号 | 618页码:563-571 |
| 通讯作者邮箱 | xlwu@imech.ac.cn |
| 关键词 | Duplex stainless steel Equal channel angular pressing Strain hardening Modeling Phase boundary |
| ISSN号 | 0921-5093 |
| 产权排序 | [Chen, L.; Yuan, F. P.; Jiang, P.; Xie, J. J.; Wu, X. L.] Chinese Acad Sci, Inst Mech, State Key Lab Nonlinear Mech, Beijing 100190, Peoples R China |
| 通讯作者 | 武晓雷 |
| 合作状况 | 国内 |
| 中文摘要 | A micro-duplex structure consisting of austenite and ferrite was produced by equal channel angular pressing and subsequent intercritical annealing. As compared to coarse-grained (CG) counterpart, the strength and ductility of micro-duplex samples are enhanced simultaneously due to smaller grain sizes in both phases and more uniformly distributed austenite in ferrite matrix. The average yield stress and uniform elongation are increased to 540 MPa and 0.3 as compared to 403MPa and 0.26 of its CG counterpart respectively. The Hall–Petch coefficients of austenite and ferrite grain boundaries were quantitatively measured as 224.9 and 428.9 MPa μm1/2 respectively. In addition, a Hall–Petch type coefficient was used to describe the ability of phase boundary to obstruct dislocation motion, which was measured as 309.7 MPa μm1/2. Furthermore, the surface-to-volume ratio of phase boundary in micro-duplex structure was estimated to be 1.17×106 m−1, which is increased by an order of magnitude as compared to 1.2×105 m−1 of its CG counterpart. Based on the strain gradient theory, a model was proposed to describe the effect of surface-to-volume ratio of phase boundary on strain hardening rate, which shows a good agreement with the experimental results. |
| 分类号 | 一类 |
| 收录类别 | SCI ; EI |
| 资助信息 | The authors would like to thank the financial supports by 973 Program of China (Nos. 2012CB932203 and 2012CB937500) and NSFC (Grants nos. 51301187, 11222224, 11021262 and 11072243). |
| 原文出处 | http://www.sciencedirect.com/science/article/pii/S0921509314011198 |
| 语种 | 英语 |
| WOS记录号 | WOS:000344439500069 |
| 公开日期 | 2014-10-08 |
| 源URL | [http://dspace.imech.ac.cn/handle/311007/49115]  |
| 专题 | 力学研究所_非线性力学国家重点实验室 |
| 通讯作者 | Wu XL(武晓雷) |
| 推荐引用方式 GB/T 7714 | Chen L,Yuan FP,Jiang P,et al. Simultaneous improvement of tensile strength and ductility in micro-duplex structure consisting of austenite and ferrite[J]. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing,2014,618:563-571. |
| APA | Chen L,Yuan FP,Jiang P,Xie JJ,Wu XL,&武晓雷.(2014).Simultaneous improvement of tensile strength and ductility in micro-duplex structure consisting of austenite and ferrite.Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing,618,563-571. |
| MLA | Chen L,et al."Simultaneous improvement of tensile strength and ductility in micro-duplex structure consisting of austenite and ferrite".Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 618(2014):563-571. |
入库方式： OAI收割
来源：力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。