丙烯酸异辛酯与1-辛烯的共聚研究
文献类型：期刊论文
| 作者 | 陈莉; 张乐涛; 蔡国星; 吾满江·艾力 |
| 刊名 | 精细石油化工
 |
| 出版日期 | 2014 |
| 卷号 | 31期号:3页码:80-83 |
| 关键词 | 润滑油 1-辛烯 丙烯酸异辛酯 共聚 lubricating oil 1-octene iso-octyl acrylate copolymerization |
| ISSN号 | 1003-9384 |
| 其他题名 | RESEARCH ON COPOLYMERIZATION OF iso-OCTYL ACRYLATE AND 1-OCTENE |
| 中文摘要 | 以丙烯酸异辛酯和1-辛烯为原料,通过自由基聚合的方法制备了聚合物.考察了引发剂及其用量、反应温度、反应时间、反应物摩尔比等聚合条件对产物收率及其性能的影响.结果表明:引发剂过氧化二叔丁基质量分数大于3％,温度高于110℃时,1-辛烯能较好地参与共聚反应,反应在12 h基本完成.其最佳反应条件是反应温度130℃,引发剂用量6％.利用凝胶渗透色谱测定了产物的相对分子质量,产物重均相对分子质量为7 800～61 100,相对分子质量分布约2.3,产物的黏度指数为200～380. |
| 英文摘要 | The polymer was prepared by radical polymerization with iso-octyl acrylate and 1-octene as raw materials. Effects of initiators and its dosage, reaction temperature, reaction time and the mole ratio of raw materials on the yield and performance of the product were investigated. The results showed that 1-octene can participate well in copolymerization reaction when dosage of di-t-butyl peroxide (DTBP) was more than 3% and the temperature was higher than 110 ℃. The reaction could be completed in 12 h. A better result could be obtained when the reaction temperature was 130 ℃ and dosage of initiator (DTBP) was 6%. The average molecular weight was from 7800 to 61 100 and molecular weight distribution was about 2.3 using gel permeation chromatography for determination. The product can be used as viscosity index improver since its viscosity index range is from 200 to 380. Meanwhile, the flash point and pour point of the copolymers suggest that it can be used as good lubricant base oil. |
| 收录类别 | CSCD |
| CSCD记录号 | CSCD:5148619 |
| 公开日期 | 2014-11-11 |
| 源URL | [http://ir.xjipc.cas.cn/handle/365002/3691]  |
| 专题 | 新疆理化技术研究所_新疆维吾尔自治区精细化工工程技术研究中心 |
| 作者单位 | 中国科学院新疆理化技术研究所精细化工工程技术研究中心 |
| 推荐引用方式 GB/T 7714 | 陈莉,张乐涛,蔡国星,等. 丙烯酸异辛酯与1-辛烯的共聚研究[J]. 精细石油化工,2014,31(3):80-83. |
| APA | 陈莉,张乐涛,蔡国星,&吾满江·艾力.(2014).丙烯酸异辛酯与1-辛烯的共聚研究.精细石油化工,31(3),80-83. |
| MLA | 陈莉,et al."丙烯酸异辛酯与1-辛烯的共聚研究".精细石油化工 31.3(2014):80-83. |
入库方式： OAI收割
来源：新疆理化技术研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。