Effect of Processing Parameters on Properties of Plasma Sprayed CuAl Coating
文献类型：期刊论文
| 作者 | Yang J(杨杰)1,2 ; Zhao XQ(赵晓琴)1; An YL(安宇龙)1; Liu N(刘宁)1,2; Zhou HD(周惠娣)1; Chen JM(陈建敏)1
|
| 刊名 | Materials and Manufacturing Processes
 |
| 出版日期 | 2014 |
| 卷号 | 29期号:9页码:1126-1130 |
| 关键词 | Characterization Coatings CuAl Deposition Friction Micro-hardness Morphology Wear |
| ISSN号 | 1042-6914 |
| 通讯作者 | 安宇龙 ; 陈建敏 |
| 英文摘要 | Plasma sprayed aluminum-bronze (CuAl) alloy coating was fabricated on steel substrate, and the effects of processing parameters on the structure and tribological behaviors of the resultant CuAl coating were reported. Results show that although the aluminum-bronze coating deposited with high primary gas flow rate and low energy density (input power divided by primary gas flow rate) has the highest hardness and lowest defect level, it just possesses a medium wear resistance under sliding wear condition. The main wear mechanism of plasma sprayed CuAl coating is splats delamination resulted from surface fatigue cracks and fracture, which are not only related to coating's hardness and defect level. Furthermore, the most wear-resistant CuAl coating is the one deposited at higher input power with low primary gas flow rate. Such processing parameters can furthest restrict the precipitation of brittle beta' phase and consequently relieves the surface fatigue cracks and fracture under unlubricated wear condition. |
| 学科主题 | 材料科学与物理化学 |
| 收录类别 | SCI |
| 资助信息 | the National Natural Science Foundation of China (No. 51175491;51302272;51275509) |
| 语种 | 英语 |
| WOS记录号 | WOS:000340359400014 |
| 公开日期 | 2014-12-30 |
| 源URL | [http://210.77.64.217/handle/362003/7088]  |
| 专题 | 兰州化学物理研究所_先进润滑与防护材料研究发展中心 兰州化学物理研究所_固体润滑国家重点实验室 |
| 作者单位 | 1.Chinese Acad Sci, Lanzhou Inst Chem Phys, State Key Lab Solid Lubricat, Lanzhou 730000, Peoples R China 2.Univ Chinese Acad Sci, Sch Chem & Chem Engn, Beijing, Peoples R China |
| 推荐引用方式 GB/T 7714 | Yang J,Zhao XQ,An YL,et al. Effect of Processing Parameters on Properties of Plasma Sprayed CuAl Coating[J]. Materials and Manufacturing Processes,2014,29(9):1126-1130. |
| APA | Yang J,Zhao XQ,An YL,Liu N,Zhou HD,&Chen JM.(2014).Effect of Processing Parameters on Properties of Plasma Sprayed CuAl Coating.Materials and Manufacturing Processes,29(9),1126-1130. |
| MLA | Yang J,et al."Effect of Processing Parameters on Properties of Plasma Sprayed CuAl Coating".Materials and Manufacturing Processes 29.9(2014):1126-1130. |
入库方式： OAI收割
来源：兰州化学物理研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。